TIDMRMM
RNS Number : 7115U
Rambler Metals & Mining PLC
26 November 2019
26 November 2019
Rambler Continues Extensions to Depth of the Ming North and 1807
Massive Sulfide Zones in New Drilling at its Ming Copper-Gold
Mine
London, England - Newfoundland and Labrador, Canada - Rambler
Metals and Mining plc (AIM: RMM) ("Rambler" or the "Company"), a
copper and gold producer, explorer, and developer, is pleased to
announce additional new high grade intersections in recent drilling
at its Ming Copper-Gold Mine in Eastern Canada.
A full version of the announcement can be viewed at:
http://www.rns-pdf.londonstockexchange.com/rns/7115U_1-2019-11-26.pdf
Please refer to this link to access all figures which are
referred to below.
EXPLORATION SUMMARY
-- 1,992 meters of exploration drilling was completed from
September 1, 2019 (the cut-off date of the previous exploration
press release dated November 4, 2019) to November 15, 2019, at an
average all-in direct drilling cost of CDN$75 per meter;
-- New drill holes have intercepted the Ming North Zone (MNZ) of
massive sulfide mineralization approximately 140 meters down plunge
of the previous deepest hole drilled in the MNZ that intercepted
the ore zone (Hole R19-745-04). Highlights from the latest drilling
include:
o R19-745-08 - 74.75 meters (m) downhole width of 8.98% copper
with 2.16 grams per tonne (g/t) gold and 14.23 g/t silver, which
includes two separate intervals shown below;
o Including - 27.77 meters (m) downhole width of 11.97% copper
with 3.14 grams per tonne (g/t) gold and 19.23 g/t silver
o And including - 19.30 meters (m) downhole width of 14.85%
copper with 2.94 g/t gold and 21.57 g/t silver
-- A new drill hole has intercepted the 1807 Zone (1807) of
massive sulfide approximately 130 meters down plunge of the
previous deepest hole drilled in the 1807 Zone (Hole R17-660-26).
Highlights include:
o R19-735-01 - 7.00 m (downhole) of 1.84% copper with 8.35 g/t
gold and 40.83 g/t silver
o R19-735-01 - 5.43m (downhole) of 2.02% copper with 1.80 g/t
gold and 20.57 g/t silver
o R19-735-01 - 10.94m (downhole) of 1.84% copper with 1.22 g/t
gold and 26.79 g/t silver
o R19-735-01 - 14.00m (downhole) of 1.33% copper with 5.42 g/t
gold and 63.16 g/t silver
Andre Booyzen, President and CEO, commented:
"The Ming North zone has, in the span of less than 18 months,
gone from an exploration conceptual target to become an integral
part of the short and long term mine production plan. This newest
drilling continues to justify our faith in pushing the exploration
drilling of this zone deeper, with the highest grade and longest
downhole intersections seen since the mine commenced operations in
2011.
In addition, the 1807 zone, which has been the backbone of
massive sulfide production at the Ming Mine since 2012, has been
extended down-plunge with excellent results in terms of copper and
gold grades.
Mineralized grades and thickness for all zones at the Ming Mine
have been demonstrated to improve with depth. Both of the
high-grade massive sulfide zones reported here will further support
the extension of the LOM plan once resource modelling and reserve
design and scheduling has been completed based on the new
information gleaned from this drilling."
Figure 1: View of the 1807 and MNZ looking across plunge, to the
southwest
THE MING NORTH ZONE (MNZ)
The main massive sulfide orebody exploited during the historic
mining era from 1972-1982 was the Ming North Zone (MNZ). At that
time, it was believed that the zone narrowed downward to
uneconomical mining widths just prior to the mine's closure in
1982. Updated 3D modeling techniques and a better understanding of
the geology of the mineralization have proven instead that the
historic massive sulfide bodies continue at depth. Recent diamond
drilling tested the MNZ below the 745 level and has proven the
continuation of high-grade copper mineralization to the 890 level
(see Figure 2). This zone remains unbounded and open at depth.
Since first discovering the continuation of the MNZ down-plunge
in August 2018, the operation has integrated the zone into its
development and production schedule with the first mining horizon
commencing at the 725L earlier this year. In addition to the down
plunge extension described in this release, this mineralization has
also been traced up-plunge, with stopes defined up to the 620 level
just below the historic pre-1982 workings.
A total of 1,481 meters of new drilling were completed on the
MNZ during the reporting period. Selected drill-holes are displayed
in Figure 2. Highlights of composited mineralized intervals are
included in Table 1 below; the complete set of individual assayed
intervals for these composites is included in Appendix 1.
Table 1: MNZ exploration drilling results with composited
down-hole and true widths and copper/gold/silver assay
Drill ZONE From To Core Copper Gold Silver True
Hole (m) (m) Length (%) (g/t) (g/t) Width
(m) (m)
R19-745-06 MNZ 187.40 203.00 15.60 2.51 1.58 9.03 7.3
------------------ ------- ------- -------- ------- ------- ------- -------
R19-745-07 MNZ 246.00 251.00 5.00 1.69 0.83 4.45 2.2
------------------ ------- ------- -------- ------- ------- ------- -------
R19-745-07 MNZ 253.63 258.18 4.55 2.26 1.96 21.00 1.3
------------------ ------- ------- -------- ------- ------- ------- -------
R19-745-08 MNZ 317.00 391.75 74.75 8.98 2.16 14.23 19.4
------------------ ------- ------- -------- ------- ------- ------- -------
Including MNZ 331.00 358.77 27.77 11.97 3.14 19.23 7.2
------------------ ------- ------- -------- ------- ------- ------- -------
Including MNZ 367.70 387.00 19.30 14.85 2.94 21.57 4.6
------------------ ------- ------- -------- ------- ------- ------- -------
Figure 2: Longsection view of the Ming North Zone (Upper)
underground diamond drilling program; looking west
THE 1807 ZONE (1807)
The 1807 zone has been mined continually since 2012 from the 304
level down to the 735 level. Limited underground drilling currently
shows the zone to narrow up-dip of the 304 level to uneconomic
mining widths. This zone remains unbounded and open at depth. The
geology in the 1807 zone is characterized by massive
pyrite-chalcopyrite-sphalerite that have been variably
recrystallized. The sulfide horizons of the 1807 zone are up to six
meters thick.
A total of 511 meters of new drilling were completed on the 1807
zone during the reporting period. Selected drill-holes are
displayed in Figure 3. Highlights of composited mineralized
intervals at the 735 level are included in Table 1 below; the
complete set of individual assayed intervals for these composites
is included in Appendix 1.
Table 2: 1807 exploration drilling results with composited
down-hole and true widths and copper/gold/silver assays
Drill ZONE From To Core Copper Gold Silver True
Hole (m) (m) Length (%) (g/t) (g/t) Width
(m) (m)
R19-735-01 1807 117.00 124.00 7.00 1.84 8.35 40.83 1.6
----------------- ------- ------- -------- ------- ------- ------- -------
R19-735-01 1807 129.57 135.00 5.43 2.02 1.80 20.57 0.6
----------------- ------- ------- -------- ------- ------- ------- -------
R19-735-01 1807 176.60 192.00 10.94 1.84 1.22 26.79 1.8
----------------- ------- ------- -------- ------- ------- ------- -------
R19-735-01 1807 266.00 280.00 14.00 1.33 5.42 63.16 1.5
----------------- ------- ------- -------- ------- ------- ------- -------
Figure 3: Longsection view of the 1807 Zone underground diamond
drilling program; looking west
Note 1
Results reported are accurate and reflective as of the date of
release. The company performs regular auditing and reconciliation
reviews on its processes following which past results may be
adjusted to reflect any changes. Core lengths can vary depending on
the angle the drill hole intersects the mineralized body. True
widths are estimated to range between 10%-85% of core lengths,
dependent upon drill sites and orebody intercept angles.
Tim Sanford, P.Eng., is the Qualified Person responsible for the
technical content of this release and has reviewed and approved it
accordingly. Mr. Sanford is an employee of Rambler Metals and
Mining Canada Limited. Tonnes referenced are dry metric tonnes
unless otherwise indicated.
Rambler maintains an ongoing quality assurance and quality
control program ('QA/QC') to ensure that exploration data collected
adheres to all compliance regulations and CIM best practices.
Rambler maintains written field procedures and has had independent
audit and verification of its geological database and all data
related to drilling, surveying, sampling and assaying.
Rambler's QA/QC program includes insertion of blanks, duplicates
and standard samples at regular intervals. Analytical control
measures for the drilling program involve both internal and
external laboratory check samples to ensure that data received and
used are accurate and reliable. Rambler has utilized the Datamine
database management program DHLogger as an effective and efficient
way to manage assay data as well as QA/QC tracking and
reporting.
With the exception of infill drill holes bearing only copper
assays, which assays are performed at Rambler's on-site laboratory,
all core samples assayed and pertaining to this report were
completed by Eastern Analytical Limited (EAL) located in
Springdale, Newfoundland. Eastern Analytical Limited is an ISO
17025 accredited laboratory and bears no relationship to
Rambler.
The information contained within this announcement is deemed by
the Company to constitute inside information as stipulated under
the Market Abuse Regulations (EU) No. 596/2014 ('MAR'). Upon the
publication of this announcement via Regulatory Information Service
('RIS'), this inside is now considered to be in the public
domain.
ABOUT RAMBLER METALS AND MINING
Rambler is a mining and development company that in November
2012 brought its first mine into commercial production. Rambler has
a 100 per cent ownership in the Ming Copper-Gold Mine, a fully
operational base and precious metals processing facility and
year-round bulk storage and shipping facility; all located on the
Baie Verte peninsula, Newfoundland and Labrador, Canada.
Following the completion of its recent productivity improvement
initiative Rambler's focus is on sustaining mine and mill
production at over 1,350 metric tonnes per day at 2% Copper at the
Ming Mine. With a return to profitability and positive cash flow,
Rambler will continue advancing engineering studies and capital
asset additions with a view to further increase production.
Along with the Ming Mine, Rambler also owns 100 per cent of the
former producing Little Deer/ Whales Back copper mines.
Rambler is listed in London under AIM:RMM.
For further information, please contact:
Andre Booyzen Sanjay Swarup Tim Sanford. P. Eng.
President and CEO CFO Vice President and
Rambler Metals & Mining Rambler Metals & Mining Corporate Secretary
Plc Plc Rambler Metals & Mining
Tel No: +44 (0) 20 Tel No: +44 (0) 20 Plc
8652-2700 7096 0662 Tel No: +1 (709) 532
Fax No: +44 (0) 20 Fax No: +44 (0) 20 5736
8652-2719 8609 0313 Fax No: +1 (709) 800
1921
Nominated Advisor (NOMAD)
Ewan Leggat, Caroline
Rowe
SP Angel Corporate
Finance LLP
Tel No: +44 (0) 20
3470 0470
Website: www.ramblermines.com
Caution Regarding Forward Looking Statements:
Certain information included in this press release, including
information relating to future financial or operating performance
and other statements that express the expectations of management or
estimates of future performance constitute "forward-looking
statements". Such forward-looking statements include, without
limitation, statements regarding copper, gold and silver forecasts,
the financial strength of the Company, estimates regarding timing
of future development and production and statements concerning
possible expansion opportunities for the Company. Where the Company
expresses or implies an expectation or belief as to future events
or results, such expectation or belief are based on assumptions
made in good faith and believed to have a reasonable basis. Such
assumptions include, without limitation, the price of and
anticipated costs of recovery of, copper concentrate, gold and
silver, the presence of and continuity of such minerals at modeled
grades and values, the capacities of various machinery and
equipment, the availability of personnel, machinery and equipment
at estimated prices, mineral recovery rates, and others. However,
forward-looking statements are subject to risks, uncertainties and
other factors, which could cause actual results to differ
materially from future results expressed, projected or implied by
such forward-looking statements. Such risks include, but are not
limited to, interpretation and implications of drilling and
geophysical results; estimates regarding timing of future capital
expenditures and costs towards profitable commercial operations.
Other factors that could cause actual results, developments or
events to differ materially from those anticipated include, among
others, increases/decreases in production; volatility in metals
prices and demand; currency fluctuations; cash operating margins;
cash operating cost per pound sold; costs per ton of ore; variances
in ore grade or recovery rates from those assumed in mining plans;
reserves and/or resources; the ability to successfully integrate
acquired assets; operational risks inherent in mining or
development activities and legislative factors relating to prices,
taxes, royalties, land use, title and permits, importing and
exporting of minerals and environmental protection. Accordingly,
undue reliance should not be placed on forward-looking statements
and the forward-looking statements contained in this press release
are expressly qualified in their entirety by this cautionary
statement. The forward-looking statements contained herein are made
as at the date hereof and the Company does not undertake any
obligation to update publicly or revise any such forward-looking
statements or any forward-looking statements contained in any other
documents whether as a result of new information, future events or
otherwise, except as required under applicable security law.
APPIX 1: INTERVAL AND COMPOSITE ASSAYS OF THE SELECTED
DRILLHOLES
Drill Hole ZONE From To Core Copper Gold Silver
(m) (m) Length (%) (g/t) (g/t)
(m)
R19-735-01 1807 117.00 118.00 1.00 2.05 48.90 20.10
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 118.00 119.07 1.07 0.19 0.09 0.40
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 119.07 120.00 0.93 1.96 1.24 26.90
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 120.00 120.60 0.60 1.58 0.62 18.40
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 120.60 121.00 0.40 2.48 4.13 44.60
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 121.00 122.00 1.00 1.95 3.73 48.70
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 122.00 123.00 1.00 2.65 5.33 42.80
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 123.00 123.25 0.25 2.28 4.88 26.40
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 123.25 123.75 0.50 1.36 2.44 14.30
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 123.75 124.00 0.25 2.45 8.58 29.90
----- -------- -------- -------- ------- ------- -------
R19-735-01 COMP 117.00 124.00 7.00 1.84 8.35 40.83
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 129.57 130.00 0.43 3.72 1.49 40.70
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 130.00 131.00 1.00 1.96 1.72 20.10
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 131.00 132.00 1.00 0.72 1.30 8.50
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 132.00 133.00 1.00 1.09 1.61 12.50
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 133.00 134.00 1.00 2.22 3.28 24.00
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 134.00 135.00 1.00 3.44 1.24 29.10
----- -------- -------- -------- ------- ------- -------
R19-735-01 COMP 129.57 135.00 5.43 2.02 1.80 20.57
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 176.60 177.00 0.40 2.94 0.84 83.70
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 177.00 177.72 0.72 1.08 0.56 21.40
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 177.72 178.20 0.48 0.12 0.14 2.60
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 182.66 183.16 0.50 0.90 0.34 10.30
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 183.16 184.00 0.84 3.70 0.53 29.60
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 184.00 185.00 1.00 1.63 0.57 18.00
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 185.00 186.00 1.00 1.30 0.72 19.00
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 186.00 187.00 1.00 1.28 2.33 23.10
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 187.00 188.00 1.00 0.60 0.99 14.40
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 188.00 189.00 1.00 0.61 1.69 19.70
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 189.00 190.00 1.00 2.33 1.32 28.10
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 190.00 191.00 1.00 2.69 2.19 31.80
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 191.00 192.00 1.00 3.09 2.12 28.80
----- -------- -------- -------- ------- ------- -------
R19-735-01 COMP 176.60 192.00 10.94 1.84 1.22 26.79
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 266.00 267.00 1.00 2.68 5.64 79.20
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 267.00 268.00 1.00 2.60 9.62 59.60
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 268.00 269.00 1.00 1.49 7.90 33.50
----- -------- -------- -------- ------- ------- -------
Drill Hole ZONE From To Core Copper Gold Silver
(m) (m) Length (%) (g/t) (g/t)
(m)
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 269.00 270.00 1.00 0.96 4.43 19.10
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 270.00 271.00 1.00 0.92 3.64 19.80
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 271.00 272.00 1.00 0.76 3.27 28.10
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 272.00 273.00 1.00 0.50 2.98 20.80
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 273.00 273.40 0.40 0.56 1.00 16.60
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 273.40 274.40 1.00 1.45 2.70 25.20
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 274.40 275.00 0.60 1.73 2.08 27.70
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 275.00 276.00 1.00 1.47 6.01 35.40
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 276.00 277.00 1.00 0.86 3.27 21.00
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 277.00 278.00 1.00 0.53 3.38 16.30
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 278.00 279.00 1.00 2.24 8.56 237.00
----- -------- -------- -------- ------- ------- -------
R19-735-01 1807 279.00 280.00 1.00 1.21 12.80 266.00
----- -------- -------- -------- ------- ------- -------
R19-735-01 COMP 266.00 280.00 14.00 1.33 5.42 63.16
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 187.40 188.00 0.60 6.16 5.15 10.50
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 188.00 1 89.00 1.00 3.27 1.33 7.70
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 189.00 190.00 1.00 2.01 1.33 7.20
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 190.00 191.00 1.00 1.10 0.43 3.00
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 191.00 192.00 1.00 0.63 0.44 2.40
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 192.00 193.00 1.00 2.05 2.12 10.30
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 193.00 194.00 1.00 1.55 0.77 7.00
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 194.00 195.00 1.00 6.00 3.54 13.50
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 195.00 196.00 1.00 2.31 1.36 6.10
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 196.00 197.00 1.00 1.52 1.29 16.20
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 197.00 198.00 1.00 1.88 0.94 7.30
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 198.00 199.00 1.00 1.64 1.33 8.00
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 199.00 200.00 1.00 1.13 0.61 3.50
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 200.00 201.00 1.00 5.27 3.21 20.00
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 201.00 202.00 1.00 2.67 1.99 18.9
----- -------- -------- -------- ------- ------- -------
R19-745-06 MNZ 202.00 203.00 1.00 2.36 0.80 3.50
----- -------- -------- -------- ------- ------- -------
R19-745-06 COMP 187.40 203.00 15.60 2.51 1.58 9.03
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 246.00 247.00 1.00 1.20 2.43 10.20
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 247.00 248.00 1.00 1.19 0.47 2.40
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 248.00 248.55 0.55 8.65 0.32 13.10
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 248.55 249.00 0.45 0.56 0.04 0.10
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 249.00 250.00 1.00 0.54 0.46 1.30
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 250.00 251.00 1.00 0.49 0.58 1.10
----- -------- -------- -------- ------- ------- -------
R19-745-07 COMP 246.00 251.00 5.00 1.69 0.83 4.45
----- -------- -------- -------- ------- ------- -------
Drill Hole ZONE From To Core Copper Gold Silver
(m) (m) Length (%) (g/t) (g/t)
(m)
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 253.63 254.00 0.37 2.37 0.68 3.60
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 254.00 255.00 1.00 3.86 0.96 6.40
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 255.00 256.00 1.00 5.53 1.59 10.80
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 256.00 256.80 0.80 3.94 1.37 5.70
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 256.80 257.68 0.88 0.47 0.03 0.10
----- -------- -------- -------- ------- ------- -------
R19-745-07 MNZ 257.68 258.18 0.50 0.09 0.01 0.10
----- -------- -------- -------- ------- ------- -------
R19-745-07 COMP 253.63 258.18 4.55 2.26 1.96 21.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 317.00 318.00 1.00 1.99 0.56 2.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 318.00 319.00 1.00 0.04 0.13 0.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 319.00 320.00 1.00 1.09 0.19 1.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 320.00 321.00 1.00 1.21 0.77 2.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 321.00 322.00 1.00 1.26 0.45 2.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 322.00 323.00 1.00 0.76 0.22 2.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 323.00 324.00 1.00 0.64 0.23 1.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 324.00 325.00 1.00 3.08 0.45 4.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 325.00 326.00 1.00 0.31 0.16 0.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 326.00 327.00 1.00. 1.61 1.66 2.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 327.00 328.00 1.00 1.20 0.16 1.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 328.00 329.00 1.00 2.40 0.26 3.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 329.00 330.00 1.00 3.39 3.20 5.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 330.00 331.00 1.00 4.17 0.38 5.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 331.00. 332.00 1.00 10.40 0.40 12.10
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 332.00 333.00 1.00 11.90 4.34 18.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 333.00 334.00 1.00 16.20 10.3 22.10
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 334.00 335.00 1.00 13.30 2.63 18.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 335.00 336.00 1.00 13.30 6.46 19.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 336.00 337.00 1.00 8.01 2.46 14.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 337.00 338.00 1.00 5.32 1.68 11.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 338.00 339.00 1.00 6.73 2.59 14.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 339.00 340.00 1.00 6.43 2.43 12.10
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 340.00 341.00 1.00 7.72 1.97 12.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 341.00 342.00 1.00 7.24 1.34 13.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 342.00 343.00 1.00 11.10 2.96 21.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 343.00 344.00 1.00 13.20 9.32 25.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 344.00 345.00 1.00 12.20 2.49 25.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 345.00 346.00 1.00 13.60 4.26 27.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 346.00 347.00 1.00 16.30 3.67 30.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 347.00 348.00 1.00 12.80 3.04 21.40
----- -------- -------- -------- ------- ------- -------
Drill Hole ZONE From To Core Copper Gold Silver
(m) (m) Length (%) (g/t) (g/t)
(m)
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 348.00 349.00 1.00 7.56 1.29 13.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 348.00 349.00 1.00 7.56 1.29 13.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 349.00 349.50 0.50 6.91 1.39 13.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 349.50 350.00 0.50 15.24 4.04 23.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 350.00 351.00 1.00 11.37 1.67 16.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 351.00 352.00 1.00 13.25 1.95 19.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 352.00 353.00 1.00 14.14 3.13 21.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 353.00 354.00 1.00 17.00 2.42 24.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 354.00 355.00 1.00 15.03 2.77 21.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 355.00 356.00 1.00 13.98 3.52 22.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 356.00 357.00 1.00 15.60 1.63 20.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 357.00 358.00 1.00 13.94 1.89 18.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 358.00 358.77 0.77 17.78 2.59 23.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 358.77 360.00 1.23 6.87 1.16 9.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 360.00 361.00 1.00 0.19 0.02 0.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 361.00 362.70 1.70 1.58 0.19 3.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 362.70 363.11 0.41 19.20 2.70 29.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 363.11 364.00 0.89 0.20 0.03 0.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 364.00 365.00 1.00 0.07 0.01 0.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 365.00 366.00 1.00 0.02 0.005 0.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 366.00 367.00 1.00 0.02 0.005 0.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 367.00 367.70 0.70 0.25 0.08 0.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 367.70 368.20 0.50 23.10 7.33 37.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 368.20 369.00 0.80 22.60 2.61 28.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 369.00 370.00 1.00 23.00 3.89 31.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 370.00 371.00 1.00 25.80 4.77 34.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 371.00 372.00 1.00 17.70 2.60 26.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 372.00 373.00 1.00 23.10 2.13 30.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 373.00 374.00 1.00 18.00 4.32 24.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 374.00 375.00 1.00 17.40 5.34 24.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 375.00 376.00 1.00 18.70 5.43 24.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 376.00 377.00 1.00 18.30 3.34 24.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 377.00 378.00 1.00 15.60 2.53 22.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 378.00 379.00 1.00 13.70 2.86 20.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 379.00 380.00 1.00 13.70 2.77 23.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 380.00 381.00 1.00 13.10 1.92 23.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 381.00 382.00 1.00 10.30 2.95 18.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 382.00 383.00 1.00 8.58 1.95 15.20
----- -------- -------- -------- ------- ------- -------
Drill Hole ZONE From To Core Copper Gold Silver
(m) (m) Length (%) (g/t) (g/t)
(m)
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 383.00 384.00 1.00 4.77 0.84 8.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 384.00 385.00 1.00 6.11 1.00 6.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 385.00 386.00 1.00 7.57 1.70 10.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 386.00 387.00 1.00 1.56 0.72 5.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 387.00 388.00 1.00 1.60 1.29 11.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 388.00 389.00 100 1.86 1.83 14.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 389.00 390.00 1.00. 1.49 0.94 7.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 390.00 391.00 1.00 3.01 1.17 9.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 391.00 391.35 0.35 1.64 0.40 2.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 391.35 391.75 0.4 1.83 0.60 4.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 COMP 317.00 391.75 74.75 8.98 2.16 14.23
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 331.00 332.00 1.00 10.40 0.40 12.10
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 332.00 333.00 1.00 11.90 4.34 18.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 333.00 334.00 1.00 16.20 10.3 22.10
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 334.00 335.00 1.00 13.30 2.63 18.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 335.00 336.00 1.00 13.30 6.46 19.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 336.00 337.00 1.00 8.01 2.46 14.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 337.00 338.00 1.00 5.32 1.68 11.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 338.00 339.00 1.00 6.73 2.59 14.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 339.00 340.00 1.00 6.43 2.43 12.10
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 340.00 341.00 1.00 7.72 1.97 12.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 341.00 342.00 1.00 7.24 1.34 13.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 342.00 343.00 1.00 11.10 2.96 21.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 343.00 344.00 1.00 13.20 9.32 25.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 344.00 345.00 1.00 12.20 2.49 25.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 345.00 346.00 1.00 13.60 4.26 27.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 346.00 347.00 1.00 16.30 3.67 30.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 347.00 348.00 1.00 12.80 3.04 21.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 348.00 349.00 1.00 7.56 1.29 13.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 349.00 349.50 0.50 6.91 1.39 13.90
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 349.50 350.00 0.50 15.24 4.04 23.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 350.00 351.00 1.00 11.37 1.67 16.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 351.00 352.00 1.00 13.25 1.95 19.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 352.00 353.00 1.00 14.14 3.13 21.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 353.00 354.00 1.00 17.00 2.42 24.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 354.00 355.00 1.00 15.03 2.77 21.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 355.00 356.00 1.00 13.98 3.52 22.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 356.00 357.00 1.00 15.60 1.63 20.40
----- -------- -------- -------- ------- ------- -------
Drill Hole ZONE From To Core Copper Gold Silver
(m) (m) Length (%) (g/t) (g/t)
(m)
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 358.00 358.77 0.77 17.78 2.59 23.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 COMP 331.00 358.77 27.77 11.97 3.14 19.23
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 367.70 368.20 0.50 23.10 7.33 37.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 368.20 369.00 0.80 22.60 2.61 28.40
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 369.00 370.00 1.00 23.00 3.89 31.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 370.00 371.00 1.00 25.80 4.77 34.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 371.00 372.00 1.00 17.70 2.60 26.00
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 372.00 373.00 1.00 23.10 2.13 30.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 373.00 374.00 1.00 18.00 4.32 24.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 374.00 375.00 1.00 17.40 5.34 24.80
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 375.00 376.00 1.00 18.70 5.43 24.50
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 376.00 377.00 1.00 18.30 3.34 24.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 377.00 378.00 1.00 15.60 2.53 22.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 378.00 379.00 1.00 13.70 2.86 20.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 379.00 380.00 1.00 13.70 2.77 23.30
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 380.00 381.00 1.00 13.10 1.92 23.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 381.00 382.00 1.00 10.30 2.95 18.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 382.00 383.00. 1.00 8.58 1.95 15.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 383.00 384.00 1.00 4.77 0.84 8.60
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 384.00 385.00 1.00 6.11 1.00 6.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 385.00 386.00 1.00 7.57 1.70 10.70
----- -------- -------- -------- ------- ------- -------
R19-745-08 MNZ 386.00 387.00 1.00 1.56 0.72 5.20
----- -------- -------- -------- ------- ------- -------
R19-745-08 COMP 367.70 387.00 19.30 14.85 2.94 21.57
----- -------- -------- -------- ------- ------- -------
This information is provided by RNS, the news service of the
London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United
Kingdom. Terms and conditions relating to the use and distribution
of this information may apply. For further information, please
contact rns@lseg.com or visit www.rns.com.
END
DRLLLFVLLILRFIA
(END) Dow Jones Newswires
November 26, 2019 06:35 ET (11:35 GMT)
Grafico Azioni Rambler Metals & Mining (LSE:RMM)
Storico
Da Feb 2024 a Mar 2024
Grafico Azioni Rambler Metals & Mining (LSE:RMM)
Storico
Da Mar 2023 a Mar 2024