TIDMYAU
Yamana Gold Provides 2012 Exploration Update
FOR: YAMANA GOLD INC.
TSX SYMBOL: YRI
NYSE SYMBOL: AUY
LSE SYMBOL: YAU
June 5, 2012
Yamana Gold Provides 2012 Exploration Update
TORONTO, ONTARIO--(Marketwire - June 5, 2012) - YAMANA GOLD INC. (TSX:YRI)(NYSE:AUY)(LSE:YAU) ("Yamana" or "the
Company") today announced mid-year highlights from its 2012 exploration program at existing operations and
development projects.
Highlights:
El Penon, Chile
=- New vein has been discovered approximately 300 metres east of Fortuna -
Fortuna Este.
=- New zone of significant mineralization has been identified south of the
main Dorada vein and to the west between Dorada and Providencia.
=- Drilling has delineated a new high grade deposit at the Elizabeth vein
located 400 metres east of Victoria within Pampa Augusta Victoria.
Significance: New discoveries are being advanced through exploration and accelerated through development as
they represent an opportunity to significantly extend minelife and further enhance production at, or above, a
440,000 ounce sustainable production level.
Chapada, Brazil
=- Mineralization has been identified at Chapada along a strike length of
almost 16 kilometres with the discovery of significant gold and copper
mineralization encountered approximately 2,500 metres south of Corpo
Sul.
=- Alteration and mineralization at Corpo Sul are similar to Chapada but
may be related to a completely distinct porphyry cluster.
Significance: Potential to enhance throughput through the blending of these higher grade ores and possibly
allow further development in size and scale to potentially result in an entirely new mine.
Mercedes, Mexico
=- New discovery at Barrancas where drilling has intersected mineralization
approximately 600 metres north of Lagunas Norte.
=- Infill drilling at Lupita is confirming the width and grades of
mineralization and is expected to continue growth of the measured and
indicated mineral resources.
Significance: Expected to enhance mineral resource base, extend minelife and maintain higher throughput and
sustainable production levels.
Pilar, Brazil
=- Maria Lazarus, a newly identified target, located 10 kilometres west of
Jordino with results similar to Jordino in both grade and width.
=- Drilling two kilometres south east of Jordino under post mineral cover
intersected coarse visible gold and assayed 0.43 metres of 66.4 g/t gold
indicating that the system is open in that direction.
Significance: Discoveries continue to confirm a cluster of mineralized zones for contribution to production at
Pilar although the area has the potential to become a multi-mine complex.
The Company's exploration budget for 2012 is approximately $125 million. Exploration will continue to focus on
mineral resource discovery and development as well as mineral reserve growth at existing operations,
development projects and on new discoveries to continue developing the Company's project pipeline. A total of
390,000 metres of drilling at 16 projects will be completed as part of the 2012 program.
El Penon, Chile
The El Penon high grade underground gold silver mine is located in northern Chile, 160 kilometres southeast of
Antofagasta. The $29 million 2012 exploration program includes 140,000 metres of surface and underground
drilling. The objective of the exploration program is to replace mineral reserves and mineral resources and, in
particular, outline new high grade ounces that will provide sustainability for long term production goals.
During the first five months of 2012 a total of 34,383 metres of drilling have been completed. The drilling has
resulted in the discovery of a new mineralized vein structure, Fortuna Este and the advancement of two new
targets that will provide mineral reserve and mineral resource growth for 2012.
Fortuna Este
Exploration drilling completed in the second half of 2011 discovered a massive quartz vein structure 300 metres
east of the Fortuna deposit. The discovery hole, SFE0001 returned 3.12 metres at 2.79 g/t gold equivalent (1.30
g/t gold and 74.45 g/t silver.) Since the discovery, seven widely spaced surface reverse circulation and
diamond drill holes and three underground diamond drill holes have been completed along a strike length of 800
metres.
To view the Fortuna Este Map, please visit the following link: www.yamana.com/Theme/NewYamana/files/pr/01.png.
--------------------------------------------------------
Fortuna Este
--------------------------------------------------------
From Width Gold Silver
Hole No. (metres) (metres) (g/t) (g/t)
--------------------------------------------------------
SFE0001 156.00 3.12 1.30 74
--------------------------------------------------------
SFE0002 169.00 2.16 1.83 174
--------------------------------------------------------
SFE0008 204.00 1.53 1.10 13
--------------------------------------------------------
SFE0009C 204.00 4.06 3.84 273
--------------------------------------------------------
SFE0012 80.00 3.14 1.26 8
------------------------------------------------
267.00 2.21 0.40 5
--------------------------------------------------------
SFE0013 142.00 1.45 0.00 0
--------------------------------------------------------
SFE0015 230.00 1.43 13.00 480
--------------------------------------------------------
UET0022 207.28 0.50 37.50 5114
--------------------------------------------------------
UET0023 328.20 0.50 51.76 1509
--------------------------------------------------------
UET0024 332.30 0.54 6.80 6
--------------------------------------------------------
(i)All widths contained in this release refer to true
widths.
The best grades and widths of mineralization have been intersected in the northern part of Fortuna Este where
SFE0009C returned 4.06 metres @ 9.3 g/t gold equivalent (3.84 g/t gold and 273 g/t silver.) UET0023 located 220
metres further north, returned 0.50 metres @ 81.94 g/t gold equivalent (51.76 g/t gold and 1,509 g/t silver)
and UET0024 intersected 0.54 metres at 6.9 g/t gold equivalent (6.8 g/t gold and 6.3 g/t silver).
At the southern end of Fortuna Este, approximately 400 metres from SFE0009C, SFE0015 intersected 1.43 metres @
22.6 g/t gold equivalent (13.0 g/t gold and 480 g/t silver).
In addition to the new Fortuna Este vein, UET0022 intersected 0.50 metres at 139.8 g/t gold equivalent (37.5
g/t gold and 5,114 g/t silver) from a zone of sulfide bearing hydrothermal breccia located approximately 100
metres east of Fortuna. This may be a splay of Fortuna vein or the discovery of a new subparallel vein system.
The presence of these high grades, multiple structures and the continuity of a mineralized structure bode well
for the upside of Fortuna Este. During the remainder of 2012, drilling will focus on expanding the high-grade
areas in both the north and south as well as delineating the new structure identified in UET0022.
Dorada South
Two new mineralized structures, Dorada West 1 and Dorada West 2 have been identified along the southern
projection of Dorada. The structures, which are separated by 20 to 30 metres of barren wall rock have been
traced along 700 metres of strike length and remain open along strike to the south. The best intersection is in
hole, SNX0238 which returned 2.98 metres @ 57.46 g/t gold equivalent (24.2 g/t gold and 1,663 g/t silver.) The
average widths and grades of mineralization with the current drill results are 2.26 metres @ 13.18 g/t gold
equivalent (5.07 g/t gold and 348 g/t silver) for Dorada West 1 and 1.06 metres @ 13.61 gold g/t equivalent
(9.21 g/t gold and 220 g/t silver) for Dorada West 2.
To view the Dorada South Map, please visit the following link: www.yamana.com/Theme/NewYamana/files/pr/02.png.
---------------------------------------------------------
Dorada West 1
---------------------------------------------------------
From Width Gold Silver
Hole No. (metres) (metres) (g/t) (g/t)
---------------------------------------------------------
SNX0235 364.00 6.16 3.87 320
---------------------------------------------------------
SNX0238 392.00 2.98 24.20 1663
---------------------------------------------------------
SNX0239 399.00 2.38 0.02 2
---------------------------------------------------------
UID0011 107.18 0.77 2.08 116
---------------------------------------------------------
UID0012 98.00 1.01 14.05 6
---------------------------------------------------------
UID0013 105.00 0.40 1.27 42
---------------------------------------------------------
UID0014 124.52 0.95 2.38 134
---------------------------------------------------------
UID0015 125.29 2.53 4.37 371
---------------------------------------------------------
UID0016 114.00 1.00 2.62 241
---------------------------------------------------------
UID0017 154.30 0.62 8.03 674
---------------------------------------------------------
UED0001 102.43 2.76 3.98 294
---------------------------------------------------------
UED0002 168.40 0.54 0.53 49
---------------------------------------------------------
UED0003 124.07 4.00 1.80 146
---------------------------------------------------------
UED0004 99.00 1.05 2.60 150
---------------------------------------------------------
PX589 388.00 4.13 0.70 44
---------------------------------------------------------
PX594 357.00 1.39 1.73 21
---------------------------------------------------------
PX598 366.00 2.42 0.50 62
---------------------------------------------------------
PX574 372.00 3.98 4.08 301
---------------------------------------------------------
PX596 319.00 3.88 10.44 790
---------------------------------------------------------
PX600 402.00 1.80 0.81 32
---------------------------------------------------------
---------------------------------------------------------
Dorada West 2
---------------------------------------------------------
From Width Gold Silver
Hole No. (metres) (metres) (g/t) (g/t)
---------------------------------------------------------
SNX0235 379.00 1.82 3.71 275
---------------------------------------------------------
SNX0236 316.00 2.84 0.01 0
---------------------------------------------------------
SNX0237 367.00 1.85 0.66 47
---------------------------------------------------------
SNX0239 441.00 0.60 1.34 104
---------------------------------------------------------
UID0011 67.53 1.32 14.99 807
---------------------------------------------------------
UID0012 71.45 0.75 3.16 49
---------------------------------------------------------
UID0013 77.50 0.61 146.29 169
---------------------------------------------------------
UID0014 84.28 1.80 5.13 522
---------------------------------------------------------
UID0015 91.50 0.38 3.48 287
---------------------------------------------------------
UID0016 93.05 0.27 4.71 358
---------------------------------------------------------
UID0017 126.50 0.49 1.19 91
---------------------------------------------------------
UED0001 77.00 0.90 2.79 182
---------------------------------------------------------
UED0003 90.00 0.77 1.71 36
---------------------------------------------------------
UED0004 96.10 0.50 1.68 89
---------------------------------------------------------
Mineralization consists of oxidized hydrothermal breccias and quartz veins with abundant hematite and manganese
oxides and is best developed near a sub horizontal contact between rhyolite tuffs and underlying rhyolite flows
and intrusive rocks. The mineralization has been traced along a dip length of approximately 150 metres and
remains open down dip.
Pampa Augusta Victoria - Elizabeth Vein
Past drilling at Pampa Augusta Victoria had identified several discontinuous vein zones in the hanging wall of
the main Victoria vein. These structures, approximately 400 metres east of Victoria, were not included in 2011
in any mineral reserve or mineral resource estimate due to the lack of drill information. Drilling in 2012 is
specifically focused on establishing the continuity of these sub parallel structures and to date, has
identified a narrow but high grade deposit in the Elizabeth vein.
Results are shown in the figures and table below:
www.yamana.com/Theme/NewYamana/files/pr/03.png
www.yamana.com/Theme/NewYamana/files/pr/04.png
---------------------------------------------------------
Elizabeth Vein
---------------------------------------------------------
From Width Gold Silver
Hole No. (metres) (metres) (g/t) (g/t)
---------------------------------------------------------
SUI0133C 205.75 0.12 0.20 98
---------------------------------------------------------
SUI0134C 205.35 0.10 1.10 281
---------------------------------------------------------
SUI0135C 282.50 0.54 13.87 3111
---------------------------------------------------------
SUI0136C 260.55 0.41 2.23 167
---------------------------------------------------------
SUI0137C 182.82 0.19 47.80 5695
---------------------------------------------------------
SUI0138C 156.05 0.22 0.22 1
---------------------------------------------------------
SUI0139C 179.15 0.02 0.00 0
---------------------------------------------------------
SUI0141C 231.00 0.35 0.15 52
---------------------------------------------------------
SUI0142C 274.00 0.34 0.98 152
---------------------------------------------------------
SUI0143C 244.30 0.19 2.83 410
---------------------------------------------------------
SUI0144C 258.40 0.40 34.53 2572
---------------------------------------------------------
SUI0146C 257.35 0.61 0.01 0
---------------------------------------------------------
SUI0147C 301.00 0.11 0.04 2
---------------------------------------------------------
SUI0155C 188.81 0.16 3.72 1262
---------------------------------------------------------
SUI0156C 193.41 0.09 0.16 2
---------------------------------------------------------
SUI0157C 236.45 0.42 7.55 2154
---------------------------------------------------------
SUI0158C 232.85 0.23 0.27 20
---------------------------------------------------------
SUI0159C 277.45 0.20 0.37 18
---------------------------------------------------------
SUI0160C 253.28 1.15 10.71 2677
---------------------------------------------------------
SUI0161C 276.95 0.21 16.10 1646
---------------------------------------------------------
SUI0162C 308.02 0.50 6.72 906
---------------------------------------------------------
SUI0163C 261.20 0.19 0.11 3
---------------------------------------------------------
SUI0164C 259.60 0.21 0.32 90
---------------------------------------------------------
SUI0165C 255.45 0.36 9.55 1265
---------------------------------------------------------
SUI0166C 287.40 0.43 8.59 196
---------------------------------------------------------
SUI0167C 272.90 0.44 1.71 281
---------------------------------------------------------
SUI0168C 264.00 0.25 1.94 729
---------------------------------------------------------
SUI0169C 327.96 0.27 1.22 856
---------------------------------------------------------
SUI0170C 197.58 0.30 0.04 1
---------------------------------------------------------
SUI0176C 166.85 0.40 2.77 597
---------------------------------------------------------
SUI0177C 151.65 0.61 19.10 1014
---------------------------------------------------------
SUI0178C 178.45 0.26 0.02 2
---------------------------------------------------------
A total of 32 holes have been completed to date at Elizabeth and have outlined mineralization along a strike
length of 300 metres and a dip length of 150 metres and the mineralization remains open along strike and
locally down dip. As with Victoria, the mineralization is characterized by extremely high silver values.
Additional drilling in 2012 will focus on extending the mineralization at Elizabeth as well as the other sub
parallel structures east of Victoria and establishing a mineral reserve and mineral resource for these areas.
Exploration drilling will continue throughout 2012 to further extend mineralization at Victoria, both along
strike and down dip, and will also expand and confirm the mineral resource potential of the Victoria Este and
Elizabeth veins.
Pampa Augusta Victoria is being fast tracked which will contribute to production and, along with the new
discoveries, will give us the flexibility to consider an increase in annual production above the newly
established sustainable level of 440,000 GEO.
Chapada, Brazil
The Chapada open pit gold-copper mine is located northwest of Brasilia in Goias State. The $7 million 2012
exploration program includes 27,000 metres of diamond drilling that will principally target the southern
extension of the Corpo Sul deposit as well as infill parts of the Corpo Sul mineral resource identified in
2011.
Early results from current diamond drilling completed south of the Corpo Sul extension have returned very
encouraging gold and copper values from sulphide mineralization. Hole CS-70 is the southernmost hole completed
to date and intersected wide zones of alteration and mineralization and 154 metres of 0.17 g/t gold and 0.32%
copper including a higher grade core of 106 metres of 0.22 g/t gold and 0.41% copper. This intersection extends
Corpo Sul for more than 2.5 kilometres along strike to the southwest. Mineralization remains open in that
direction and along dip in both directions. Additional drilling on sections spaced between 200 to 400 metres
apart confirm similar grades to that in CS-70 as outlined in the tables and figure below from south to north.
To view the Corpo Sul Map, please visit the following link: www.yamana.com/Theme/NewYamana/files/pr/05.png.
--------------------------------------------------------------------
Corpo Sul
--------------------------------------------------------------------
From Width Gold Copper
Section Hole No. (metres) (metres) (g/t) (%)
--------------------------------------------------------------------
A CS-70 166 154 0.17 0.32
--------------------------------------------------------------------
incl. 182 106 0.22 0.41
--------------------------------------------------------------------
CS-83 pending
--------------------------------------------------------------------
B CS-66 149 86.4 0.18 0.34
--------------------------------------------------------------------
incl. 158 29 0.23 0.4
--------------------------------------------------------------------
CS-85 pending
--------------------------------------------------------------------
CS-78 pending
--------------------------------------------------------------------
C CS-59 237 58 0.1 0.28
--------------------------------------------------------------------
CS-64 106 124 0.15 0.26
--------------------------------------------------------------------
incl. 149 46 0.24 0.41
--------------------------------------------------------------------
CS-67 176 45 0.26 0.27
--------------------------------------------------------------------
incl. 178 23 0.36 0.35
--------------------------------------------------------------------
D CS-55 94 179 0.13 0.25
--------------------------------------------------------------------
incl. 187 57.8 0.2 0.41
--------------------------------------------------------------------
CS-61 132.9 91.1 0.4 0.38
--------------------------------------------------------------------
incl. 134 72 0.49 0.44
--------------------------------------------------------------------
E CS-47 109 77 NSV 0.29
--------------------------------------------------------------------
incl. 114 6 0.2 0.48
--------------------------------------------------------------------
incl. 136 25 0.13 0.4
--------------------------------------------------------------------
CS-51 48.8 168.2 0.13 0.25
--------------------------------------------------------------------
incl. 127 43 0.23 0.39
--------------------------------------------------------------------
incl. 199 18 0.13 0.31
--------------------------------------------------------------------
F CS-46 24.1 129.1 0.14 0.27
--------------------------------------------------------------------
incl. 56 13 0.24 0.48
--------------------------------------------------------------------
CS-43 119 124 NSV 0.16
--------------------------------------------------------------------
G CS-34 43.1 210.9 0.13 0.2
--------------------------------------------------------------------
incl. 74 31.9 0.22 0.35
--------------------------------------------------------------------
CS-37 80 69.2 0.37 0.28
--------------------------------------------------------------------
incl. 100 35 0.55 0.37
--------------------------------------------------------------------
H CS-35 105 127 0.14 0.25
--------------------------------------------------------------------
incl. 106 31 0.21 0.4
--------------------------------------------------------------------
CS-36 13.3 134.3 0.4 0.41
--------------------------------------------------------------------
incl. 45 81.4 0.56 0.5
--------------------------------------------------------------------
CS-41 7.4 119.6 0.24 0.2
--------------------------------------------------------------------
incl. 21 41 0.4 0.3
--------------------------------------------------------------------
Note: 0.1 g/t gold cutoff, 0.1% copper cutoff. Including results
0.3g/t Au or 0.3% Cu cutoff "incl."
The results from Corpo Sul confirm similar metallurgy to the Chapada main pit ores. Based on this and the
associated low strip ratio of the existing resource the Company is provided with the flexibility to at least
blend ore between the main pit and Corpo Sul to increase production, particularly copper production because of
the higher copper grade, although it may represent the opportunity for an entirely new mine.
Drilling completed along strike of the Chapada southwest extension defined in 2011 has returned mixed results
with narrow low grade values in CS-45 and CS-48 but both widths and grades improve to the northeast towards the
Chapada pit.
--------------------------------------------------------------------
Chapada Southwest
--------------------------------------------------------------------
From Width Gold Copper
Section Hole No. (metres) (metres) (g/t) (%)
--------------------------------------------------------------------
I CS-32 95 50 0.25 0.22
CS-38 38.21 39.72 NSV 0.15
--------------------------------------------------------------------
J CS-42 92 83.16 0.14 0.23
CS-44 49 65.26 0.14 0.25
--------------------------------------------------------------------
CS-49 97 65 0.13 0.26
--------------------------------------------------------------------
Note: 0.1 g/t gold cutoff, 0.1% Cu cutoff.
The drilling at Corpo Sul has identified gold and copper mineralization along a minimum strike length of 4.5
kilometres, to a depth of almost 300 metres and mineralization remains open along strike and down dip. With the
discovery of Suruca in late 2009, Corpo Sul in 2011 and the continued positive results at Corpo Sul this year,
economic copper and gold mineralization has now been identified along a strike length of almost 16 kilometres
including the main Chapada deposit.
Corpo Sul will provide the opportunity to further evaluate whether it will be more than just a higher grade ore
contribution to an ore blend, or as it begins to show sufficient size and continuity to either represent a
larger portion of ore contribution or an entirely new mine adjacent to Chapada.
During the remainder of 2012, diamond drilling will continue to focus on the expansion and delineation of
mineralization at the Corpo Sul extension and on confirming grade continuity of the Corpo Sul mineral resource
through infill drilling.
Mercedes, Mexico
Mercedes is a gold and silver project located in Sonora Mexico and is Yamana's newest mine. The $7 million 2012
exploration program includes approximately 33,000 metres of diamond drilling focused on the expansion of
mineral reserves and mineral resources, particularly at the Lagunas Norte extensions within the Barrancas zone
and at the Lupita vein zone. Three core rigs are currently on site and a total of 16,034 metres have been
drilled in 55 holes year-to-date.
Annual production from the mine is estimated to be up to 120,000 gold equivalent ounces in 2012, growing to
140,000 gold equivalent ounces in 2014. Mercedes is a gold-silver vein/stockwork system with mineralization
contained in four areas: Mercedes, Barrancas, Klondike and Lupita.
To view the Barrancas 2012 Drillholes Map: www.yamana.com/Theme/NewYamana/files/pr/06.png.
Barrancas Vein- Marianas Zone extension
A total of 12 holes have been completed as part of a widely-spaced drilling program that has tested nearly
1,000 metres of strike length to the north west of the Lagunas Norte ore body on the Barrancas structural
trend. Almost all holes have intersected broad zones of fractured, iron stained and argillized andesite.
However, associated quartz-carbonate-adularia stockwork/brecciated vein zones are highly variable in
distribution and width.
Ore grade values have been intersected in six holes located nearly 600 metres north west of Lagunas Norte and
are highlighted by M12-639D which intersected two vein zones with 3.04 metres of 12.69 g/t gold and 11.5 g/t
silver and an additional 1.24 metres of 74.7 g/t gold and 4.0 g/t silver. Additional drilling completed in 2012
will be focused on establishing the continuity and extensions of this newly discovered "Marianas" zone.
Results from recent drilling are highlighted in the table and figure below:
-----------------------------------------------------------------------
Barrancas Vein - Marianas Zone
-----------------------------------------------------------------------
From To Interval Gold Silver
Hole No. (metres) (metres) (metres) (g/t) (g/t)
-----------------------------------------------------------------------
M12-637D 239.27 240.79 1.52 4.69 27.0
-----------------------------------------------------------------------
M12-638D 323.75 325.55 1.80 4.35 13.3
-----------------------------------------------------------------------
M12-638D and 335.28 339.85 4.57 3.12 8.2
-----------------------------------------------------------------------
M12-639D 454.77 457.81 3.04 12.69 11.5
-----------------------------------------------------------------------
M12-639D and 468.48 470.01 1.53 3.57 8.0
-----------------------------------------------------------------------
M12-639D and 476.38 477.62 1.24 74.70 4.0
-----------------------------------------------------------------------
M12-640D 334.67 335.99 1.32 2.53 4.0
-----------------------------------------------------------------------
M12-640D and 397.60 401.73 4.13 2.68 15.6
-----------------------------------------------------------------------
M12-640D and 411.32 412.92 1.61 14.50 17.0
-----------------------------------------------------------------------
M12-640D and 480.20 481.86 1.66 3.32 23.0
-----------------------------------------------------------------------
M12-641D 448.97 450.49 1.52 3.94 6.0
-----------------------------------------------------------------------
M12-643D 401.73 402.28 0.55 4.21 6.0
-----------------------------------------------------------------------
M12-644D 445.40 448.37 2.97 11.33 15.7
-----------------------------------------------------------------------
Note: 2.0 g/t gold equivalent cutoff
www.yamana.com/Theme/NewYamana/files/pr/07.png
This new discovery at Marianas is currently not reflected in Mercedes' mineral reserves and mineral resources
and it is expected that continued exploration success will contribute to mineral resources growth in 2012.
Lupita
Thirty metre in-fill drilling at Lupita continues to demonstrate that the quartz-carbonate vein/stockwork zone
at the lower andesite/upper tuff contact is very continuous. Vein width varies from 0.5 to nearly 15.0 metres
although the amount of greenish ore stage quartz varies greatly from hole to hole. Forty-one holes have been
completed to date and assays returned from the first 37 holes indicate that most holes within the 2011 inferred
grade shell contain at least narrow intervals with grades over 2.0 g/t gold equivalent.
Results are shown in the figure and table below:
www.yamana.com/Theme/NewYamana/files/pr/08.png
=--------------------------------------------------------------------------
Mercedes Drill Results - Lupita
=--------------------------------------------------------------------------
Gold
Equivalent
From To Interval Gold Silver (AuEq)(g/t)
Hole No. (metres) (metres) (metres) (g/t) (g/t) (150:1)
=--------------------------------------------------------------------------
L12-157D 72.54 79.25 6.71 4.03 23.2 4.18
=--------------------------------------------------------------------------
L12-162D 205.64 210.88 5.24 2.45 48.3 3.01
=--------------------------------------------------------------------------
L12-164D 226.77 228.30 1.53 11.35 8.0 11.49
=--------------------------------------------------------------------------
L12-165D 252.07 253.51 1.44 3.72 30.0 3.92
=--------------------------------------------------------------------------
L12-168D 194.46 197.51 3.05 3.83 14.5 3.93
=--------------------------------------------------------------------------
L12-169D 212.75 213.06 0.31 2.44 8.0 2.49
=--------------------------------------------------------------------------
L12-169D and 216.71 217.32 0.61 1.97 12.0 1.97
=--------------------------------------------------------------------------
L12-170D 284.38 286.37 1.99 5.02 22.4 5.03
=--------------------------------------------------------------------------
L12-171D 126.19 127.41 1.22 2.21 33.5 2.43
=--------------------------------------------------------------------------
L12-173D 144.07 145.39 1.32 5.37 82.0 5.91
=--------------------------------------------------------------------------
L12-173D and 146.81 147.52 0.71 2.36 34.0 2.58
=--------------------------------------------------------------------------
L12-174D 178.64 182.58 3.94 4.65 58.0 5.03
=--------------------------------------------------------------------------
L12-175D 178.17 182.11 3.94 4.25 40.3 4.54
=--------------------------------------------------------------------------
L12-176D 201.17 203.00 1.83 5.28 50.9 5.62
=--------------------------------------------------------------------------
L12-176D and 219.46 220.99 1.53 4.93 30.0 5.13
=--------------------------------------------------------------------------
L12-178D 47.85 48.46 0.61 3.48 5.0 3.51
=--------------------------------------------------------------------------
L12-179D 162.76 166.15 3.39 6.88 33.0 7.10
=--------------------------------------------------------------------------
L12-182D 31.39 32.00 0.61 101.50 52.0 101.85
=--------------------------------------------------------------------------
L12-183D 177.70 179.22 1.52 3.89 18.5 4.02
=--------------------------------------------------------------------------
L12-184D 175.50 177.39 1.89 2.96 33.8 3.19
=--------------------------------------------------------------------------
L12-185D 197.07 198.12 1.05 3.11 7.0 3.15
=--------------------------------------------------------------------------
L12-186D 197.21 199.64 2.43 9.81 74.3 10.31
=--------------------------------------------------------------------------
L12-187D 183.18 183.79 0.61 2.95 13.0 3.03
=--------------------------------------------------------------------------
L12-187D and 184.21 186.54 2.33 2.74 18.8 2.87
=--------------------------------------------------------------------------
L12-189D 281.03 283.40 2.43 2.97 40.3 3.24
=--------------------------------------------------------------------------
L12-190D 231.34 231.70 0.36 2.01 20.0 2.14
=--------------------------------------------------------------------------
L12-190D and 233.05 234.65 1.60 3.11 27.5 3.29
=--------------------------------------------------------------------------
L12-191D 277.95 280.72 2.77 5.79 77.8 6.31
=--------------------------------------------------------------------------
L12-192D 202.08 203.91 1.83 5.73 70.3 6.19
=--------------------------------------------------------------------------
L12-194D 182.58 184.40 1.82 6.19 53.1 6.55
=--------------------------------------------------------------------------
Note: Cutoff 2.0 g/t gold equivalent
The drill program currently being completed at Lupita will increase the confidence in mineral resources from
inferred to indicated and enable a mineral reserve analysis to be completed.
The continued exploration success and growing mineral resources at Mercedes will contribute to sustainability
of higher throughput levels of 1,800 tonnes per day, higher production level of 140,000 ounces of annual
production expected beginning in 2014 and the potential increase extension of mine life.
Pilar, Brazil
Pilar is a development stage project located in Goias, Brazil approximately 80 kilometres from the Company's
Chapada mine. The $10 million 2012 exploration program includes 36,000 metres of diamond drilling.
The drilling is focused on the expansion of the Jordino resource both down dip, which has been shown to be open
for more than two kilometres of dip length, and along strike to the south under younger cover rocks. In
addition, exploration drilling will be completed at Maria Lazarus located approximately ten kilometres west of
Jordino. Year-to-date, 24 drill holes have been completed totaling 11,227 metres and drill results confirm that
growth in mineral reserves and mineral resources will continue in 2012.
The project is currently in development with production expected to begin in mid-2013. Annual production from
the mine is estimated to be 140,000-150,000 ounces of gold.
Jordino
JD-540 intersected 0.43 metres of 66.4 g/t gold almost two kilometres south east of the current Jordino mineral
resource under younger cover rocks. This is the only drill hole to test the potential strike extension to the
south east and although the geology is not directly correlatable to Jordino, it indicates that the mineralized
system continues over more than 2,000 metres along strike.
To view the Pilar Exploration JD 540 Hole Location Map, please visit the following link:
www.yamana.com/Theme/NewYamana/files/pr/09.png.
Maria Lazarus
This target is located approximately ten kilometres west of the Jordino ore body and is similar in geology and
style of mineralization to Jordino. A series of historic garimpo activities have exposed a well mineralized
structure along a strike length of at least three kilometres. Initial wide space exploratory drilling commenced
in late 2011 and to date 18 diamond drill holes have been completed testing a strike length of 1,200 metres and
a dip length in excess of 400 metres. Assay results from holes ML-005 through ML-013 have identified a main
core of mineralization of 700 metres in strike length that has grades and widths similar to Jordino with widths
of between 0.5-1.0 metre and grades between 3.61 and 18.25 g/t gold.
Results are shown in the table and figure below:
------------------------------------------------------------------
Maria Lazarus & Jordino Southeast
------------------------------------------------------------------
From To Length Gold Gold
Hole No. (metres) (metres) (metres) (g/t)(1) (g/t)(2)
------------------------------------------------------------------
ML-001 55.00 56.00 1.00 4.25
------------------------------------------------------------------
ML-002 93.00 95.00 2.00 4.47
------------------------------------------------------------------
ML-003 41.00 42.00 1.00 2.89
------------------------------------------------------------------
ML-004 NSV
------------------------------------------------------------------
ML-005 474.47 475.34 0.87 4.04 4.16
------------------------------------------------------------------
ML-006 185.00 186.03 1.03 3.61 4.27
------------------------------------------------------------------
ML-007 146.68 148.32 1.64 1.55 1.41
------------------------------------------------------------------
ML-008 Abandon
------------------------------------------------------------------
ML-008A 23.63 24.95 1.32 3.44 4.50
------------------------------------------------------------------
Incl. 24.19 24.95 0.76 4.80 6.26
------------------------------------------------------------------
ML-008A 29.95 31.00 1.05 6.38 9.98
------------------------------------------------------------------
Incl. 30.46 31.00 0.54 11.40 18.90
------------------------------------------------------------------
ML-009 593.00 594.97 1.97 2.06 2.44
------------------------------------------------------------------
Incl. 594.47 594.97 0.50 4.09 4.71
------------------------------------------------------------------
ML-009 598.00 598.50 0.50 10.35 12.80
------------------------------------------------------------------
ML-009 601.35 601.87 0.52 4.30 4.77
------------------------------------------------------------------
ML-010 968.15 969.85 1.70 2.03 3.16
------------------------------------------------------------------
Incl. 969.25 969.85 0.60 3.57 7.05
------------------------------------------------------------------
ML-011 740.43 741.00 0.57 21.10 18.25
------------------------------------------------------------------
ML-012 303.61 304.78 1.17 4.15 4.56
------------------------------------------------------------------
Incl. 304.25 304.78 0.53 8.45 9.40
------------------------------------------------------------------
ML-013 120.26 120.80 0.54 4.62 4.25
------------------------------------------------------------------
ML-014 NSV
------------------------------------------------------------------
ML-015 NSV
------------------------------------------------------------------
ML-017 617.00 617.67 0.67 2.92 2.21
------------------------------------------------------------------
JD-540 767.89 768.32 0.43 66.4
------------------------------------------------------------------
Cutoff: 1.5g/t Gold NSV: Not significant value
(1) Based on gold fire assay
(2) Based on gold screen fire assay
The success of this early stage drilling effort at Maria Lazarus continues to confirm that the area surrounding
Pilar is a cluster of mineralized zones which will contribute to Pilar's ore feed or potentially could be
developed as a multiple mine complex.
The Company has already increased the capacity of the mill by 30 percent from the feasibility study level and
continues to assess potential increases to production and mine life with a strategic plan to fully utilize the
increased capacity beginning in 2014.
2012 Exploration Program
Exploration continues to be a vital component of organic value creation. In 2012 the Company is expecting to
spend $125 million to continue with the previous exploration successes. The focus of the exploration program is
to discover additional ounces with the potential to be brought quickly to production, enhancing asset values
and to discover ounces which can be brought into the Company's project pipeline, enhancing future value.
Quality Assurance and Quality Control
Yamana incorporates a rigorous Quality Assurance and Quality Control program for all of its mines and
exploration projects which conforms to industry Best Practices as outlined by the CSE and National Instrument
43-101. This includes the use of independent third party laboratories and the use of professionally prepared
standards and blanks and analysis of sample duplicates with a second independent laboratory. For additional
information on these programs for Chapada and El Penon please refer to the following two technical reports:
Chapada Mine and Suruca Project, Goias State, Brazil Technical Report pursuant to National Instrument 43-101 of
the Canadian Securities Administrators dated March 7, 2011 and Technical Report on the El Penon mine, Northern
Chile dated December 7, 2010 found at www.sedar.com.
Qualified Persons
Sergio Brandao, P. Geo., Director of Exploration, Brazil for Yamana Gold Inc. has reviewed and approved the
scientific and technical information contained within this press release relating to Chapada and Pilar and
serves as the Qualified Person as defined in National Instrument 43-101.
Darcy Marud, P. Geo., SVP Exploration for Yamana Gold Inc. has reviewed and approved the scientific and
technical information contained within this press release relating to El Penon and Mercedes and serves as the
Qualified Person as defined in National Instrument 43-101.
About Yamana
Yamana is a Canadian-based gold producer with significant gold production, gold development stage properties,
exploration properties, and land positions in Brazil, Argentina, Chile, Mexico and Colombia. Yamana plans to
continue to build on this base through existing operating mine expansions, throughput increases, development of
new mines, the advancement of its exploration properties and by targeting other gold consolidation
opportunities with a primary focus in the Americas.
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS: This news release contains "forward-looking statements"
within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable
Canadian securities legislation. Except for statements of historical fact relating to the Company, information
contained herein constitutes forward-looking statements, including any information as to the Company's
strategy, plans or future financial or operating performance. Forward-looking statements are characterized by
words such as "plan," "expect", "budget", "target", "project", "intend," "believe", "anticipate", "estimate"
and other similar words, or statements that certain events or conditions "may" or "will" occur. Forward-looking
statements are based on the opinions, assumptions and estimates of management considered reasonable at the date
the statements are made, and are inherently subject to a variety of risks and uncertainties and other known and
unknown factors that could cause actual events or results to differ materially from those projected in the
forward-looking statements.
These factors include the Company's expectations in connection with the projects and exploration programs
discussed herein being met, the impact of general business and economic conditions, global liquidity and credit
availability on the timing of cash flows and the values of assets and liabilities based on projected future
conditions, fluctuating metal prices (such as gold, copper, silver and zinc), currency exchange rates (such as
the Brazilian Real, the Chilean Peso, the Argentine Peso, and the Mexican Peso versus the United States
Dollar), possible variations in ore grade or recovery rates, changes in the Company's hedging program, changes
in accounting policies, changes in the Company's corporate mineral resources, risk related to non-core mine
dispositions, changes in project parametres as plans continue to be refined, changes in project development,
construction, production and commissioning time frames, risk related to joint venture operations, the
possibility of project cost overruns or unanticipated costs and expenses, higher prices for fuel, steel, power,
labour and other consumables contributing to higher costs and general risks of the mining industry, failure of
plant, equipment or processes to operate as anticipated, unexpected changes in mine life, final pricing for
concentrate sales, unanticipated results of future studies, seasonality and unanticipated weather changes,
costs and timing of the development of new deposits, success of exploration activities, permitting time lines,
government regulation and the risk of government expropriation or nationalization of mining operations,
environmental risks, unanticipated reclamation expenses, title disputes or claims, limitations on insurance
coverage and timing and possible outcome of pending litigation and labour disputes, as well as those risk
factors discussed or referred to in the Company's annual Management's Discussion and Analysis and Annual
Information Form for the year ended December 31, 2011 filed with the securities regulatory authorities in all
provinces of Canada and available at www.sedar.com, and the Company's Annual Report on Form 40-F filed with the
United States Securities and Exchange Commission. Although the Company has attempted to identify important
factors that could cause actual actions, events or results to differ materially from those described in forward-
looking statements, there may be other factors that cause actions, events or results not to be anticipated,
estimated or intended.
There can be no assurance that forward-looking statements will prove to be accurate, as actual results and
future events could differ materially from those anticipated in such statements. The Company undertakes no
obligation to update forward-looking statements if circumstances or management's estimates, assumptions or
opinions should change, except as required by applicable law. The reader is cautioned not to place undue
reliance on forward-looking statements. The forward-looking information contained herein is presented for the
purpose of assisting investors in understanding the Company's expected financial and operational performance
and results as at and for the periods ended on the dates presented in the Company's plans and objectives and
may not be appropriate for other purposes.
CAUTIONARY NOTE TO U.S. INVESTORS CONCERNING ESTIMATES OF MEASURED, INDICATED AND INFERRED MINERAL RESOURCES
This news release uses the terms "Measured", "Indicated" and "Inferred" Mineral Resources. United States
investors are advised that while such terms are recognized and required by Canadian regulations, the United
States Securities and Exchange Commission does not recognize them. "Inferred Mineral Resources" have a great
amount of uncertainty as to their existence, and as to their economic and legal feasibility. It cannot be
assumed that all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under
Canadian rules, estimates of Inferred Mineral Resources may not form the basis of feasibility or other economic
studies. United States investors are cautioned not to assume that all or any part of Measured or Indicated
Mineral Resources will ever be converted into Mineral Reserves. United States investors are also cautioned not
to assume that all or any part of an Inferred Mineral Resource exists, or is economically or legally mineable.
(All dollar amounts are expressed in United States dollars unless otherwise specified)
FOR FURTHER INFORMATION PLEASE CONTACT:
Yamana Gold Inc.
Lisa Doddridge, Vice President,
Corporate Communications and Investor Relations
416-945-7362 or 1-888-809-0925
lisa.doddridge@yamana.com
www.yamana.com
Yamana Gold Inc.
Grafico Azioni Yamana Gold (LSE:YAU)
Storico
Da Mag 2024 a Giu 2024
Grafico Azioni Yamana Gold (LSE:YAU)
Storico
Da Giu 2023 a Giu 2024
