VANCOUVER, BC,
Feb. 2, 2022 /CNW/ -
Mako Mining Corp. (TSXV: MKO) (OTCQX: MAKOF) ("Mako" or
the "Company") is pleased to report positive drill results from
expansion drilling to the Northeast and Southwest of the current
San Albino resource.
A technical report for the updated mineral resource estimate
(the "MDA Resource") was filed in accordance with National
Instrument 43-101, Standards of Disclosure for Mineral Projects
("NI 43-101") under the Company's SEDAR profile at www.sedar.com
and available on the Company's website at www.makominingcorp.com
(see press release dated October 19,
2020).
The objective of this drilling is to expand the current open pit
mineral resources down dip and along strike at the West Pit, which
is currently being mined along with the Central Pit to the
east. Additionally, the program was designed to delineate new
mineral resources in the Southwest (SW) Pit area. While there have
been previous intersections at the SW Pit area from 2011-2013 (see
Table 2), at the time of the MDA Resource, there was insufficient
data to confidently estimate a significant open pit mineral
resource in this zone. This program will lead to a much better
understanding of the geological controls at the SW Pit, and
management believes that an increase in the mineral resources at
both the West Pit and SW Pit areas is likely.
The Company currently has four rigs operational, with two drill
rigs dedicated to exploration at the San Albino area, and two rigs
dedicated to Las Conchitas to the south. An additional two rigs are
scheduled to arrive at site later this week to accelerate the San
Albino drilling and plans to increase the total rig count to 8 are
underway to allow the commencement of regional drilling at our
newly permitted Potrerillos and La Segoviana concessions.
Highlights
- Selected intercepts of shallow high-grade mineralization
include:
-
- 22.20 g/t Au and 23.1 g/t Ag (3.3m estimated true width) in hole SA21-552 at
the West Pit approximately 90m
outside the current open pit mineral resource.
- 31.70 g/t Au and 39.2 g/t Ag (1.55m estimated true width) in hole SA21-536 at
the SW Pit.
- 23 pending holes (14 in the West Pit and 9 in the SW Pit),
had detailed geologic logging which indicated that they intersected
the mineralized zones as predicted due to the presence of galena
and arsenopyrite. Thirteen of these pending holes which intersected
mineralization also showed the presence of visible gold.
Akiba Leisman, Chief Executive
Officer of Mako states that, "these are exciting results which will
likely expand the current mineral resources at San Albino along
strike in both directions as well as down dip. When we published
the MDA Resource in 2020, we intentionally took a conservative
approach to calculating our mineral resources. From
2011-2013, despite 11 intersections of high-grade mineralization in
the SW Pit, only a de minimis open pit mineral resource was
calculated in this area, as we felt the geological model needed to
be refined. Now that we have clear controls over the geology, with
numerous pending holes intersecting mineralization where predicted,
and usually containing visible gold, we are confident that this
drill program will expand the mineral resources at San Albino. We
will release new and pending results in due course after we receive
them back from the laboratory."
Specific comments on significant results reported in this
press release are as follows:
West Pit
Drill hole SA21-552 intersected a mineralized interval of 22.20
g/t Au and 23.1 g/t Ag over 3.80m
(3.3m estimated true width). This
intercept is located approximately 90m outside the current open pit resource
indicating the potential to expand the open pit mineral resources
down dip and to the northeast along strike. In addition, this hole
intersected the vein at 51m below
surface confirming the continuity of an upthrown block that brings
the San Albino zone closer to surface than previous down dip
projections (see press release dated July
27, 2020 and attached plan map).
Results are pending for 23 holes drilled in the West Pit area.
Detailed geologic logging indicates that 14 of the holes
intersected the mineralized zone as predicted due to the presence
of galena and arsenopyrite, with 8 of these holes containing
visible gold. One of these holes, SA21-560 intersected a
3.2m wide mineralized zone,
20m outside of the current open pit
resources and 40m beyond the current
permitted pit limit.
SW Pit
The objective of the drilling in this area is to identify new,
open pit and underground mineral resources in the sparsely tested
Southwestern portion of the permitted pit boundary. Previous
drilling in this area defined limited shallow mineral resources and
deeper drilling intersected encouraging mineralized zones. However,
the continuity of these deeper zones was not established and most
of the intercepts were not included in the MDA
Resource.
Recent drilling is aiding in the interpretation of this zone and
indicates a potential link between the deeper mineralized zones and
the shallow zones over an area of approximately 300m by 130m with
extensions up to 413m downdip.
Hole SA21-536 was drilled with a goal of providing a connection
between the surface exposure and deeper mineralized intervals
drilled by the Company during the 2011-2013 drilling campaign. This
drill hole intersected a mineralized interval of 31.70 g/t Au and
39.2 g/t Ag over 2.40 m (1.55m estimated true width) 64m from surface.
In addition, several drill holes tested a surface exposure of
the mineralized zone, including drill hole SA21-530, which
intercepted 8.43 g/t Au and 10.8 g/t Ag over 1.40m, 10m from
surface.
Results are pending for 11 drill holes in the SW Pit area.
Detailed geologic mapping indicates that 9 of the drill holes
intersected a mineralized zone due to the presence of galena and
arsenopyrite, with 5 of these holes containing visible gold.
Table 1: Assay Results Reported in This Press Release
Area
|
Drill
hole
|
From
(m)
|
To
(m)
|
Width
(m)
|
Au
(g/t)
|
Ag
(g/t)
|
Interval
Averages
|
Est. true
width
(m)
|
SW
Pit
|
SA20-447
|
1.00
|
2.10
|
1.10
|
1.85
|
6.3
|
1.85 g/t Au and 6.3 g/t
Ag over 1.10 m
|
1.0
|
29.10
|
30.10
|
1.00
|
1.97
|
2.5
|
1.97 g/t Au and 2.5 g/t
Ag over 1.00 m
|
0.9
|
SA20-448
|
20.80
|
21.40
|
0.60
|
2.24
|
2.8
|
3.13 g/t Au and 4.4 g/t
Ag over 1.40 m
|
1.4
|
21.40
|
22.20
|
0.80
|
3.80
|
5.6
|
SA20-449
|
5.80
|
6.80
|
1.00
|
5.82
|
17.5
|
5.82 g/t Au and 17.5
g/t Ag over 1.00 m
|
0.8
|
12.50
|
14.00
|
1.50
|
2.98
|
6.3
|
2.98 g/t Au and 6.3 g/t
Ag over 1.50 m
|
1.3
|
SA21-512
|
2.90
|
3.70
|
0.80
|
3.78
|
6.9
|
3.78 g/t Au and 6.9 g/t
Ag over 0.80 m
|
0.7
|
15.20
|
16.20
|
1.00
|
1.26
|
3.8
|
1.26 g/t Au and 3.8 g/t
Ag over 1.00 m
|
0.9
|
SA21-513
|
24.80
|
25.50
|
0.70
|
3.43
|
11.9
|
3.43 g/t Au and 11.9
g/t Ag over 0.70 m
|
0.5
|
SA21-514
|
14.80
|
16.00
|
1.20
|
1.90
|
11.5
|
1.75 g/t Au and 9 g/t
Ag over 4.40 m
|
3.4
|
16.00
|
17.00
|
1.00
|
1.19
|
8.1
|
17.00
|
18.00
|
1.00
|
0.87
|
4.7
|
18.00
|
19.20
|
1.20
|
2.79
|
10.7
|
SA21-516
|
9.40
|
10.20
|
0.80
|
8.61
|
10.4
|
8.61 g/t Au and 10.4
g/t Ag over 0.80 m
|
0.6
|
SA21-517
|
9.50
|
10.70
|
1.20
|
3.26
|
13.7
|
3.26 g/t Au and 13.7
g/t Ag over 1.20 m
|
0.9
|
SA21-518
|
21.90
|
22.90
|
1.00
|
5.71
|
19.9
|
3.70 g/t Au and 13.2
g/t Ag over 1.80 m
|
1.2
|
22.90
|
23.70
|
0.80
|
1.20
|
4.8
|
SA21-524
|
42.70
|
43.50
|
0.80
|
9.80
|
11.6
|
5.36 g/t Au and 9 g/t
Ag over 1.70 m
|
1.6
|
43.50
|
44.40
|
0.90
|
1.41
|
6.6
|
SA21-529
|
37.00
|
38.00
|
1.00
|
2.45
|
3.9
|
2.45 g/t Au and 3.9 g/t
Ag over 1.00 m
|
0.5
|
SA21-530
|
10.50
|
11.20
|
0.70
|
15.10
|
16.6
|
8.43 g/t Au and 10.8
g/t Ag over 1.40 m
|
0.9
|
11.20
|
11.90
|
0.70
|
1.76
|
4.9
|
SA21-531
|
45.40
|
46.00
|
0.60
|
2.70
|
44.7
|
2.70 g/t Au and 44.7
g/t Ag over 0.60 m
|
0.3
|
SA21-532
|
|
|
|
|
|
Pending
|
|
SA21-533
|
12.50
|
13.70
|
1.20
|
1.00
|
4.8
|
1.00 g/t Au and 4.8 g/t
Ag over 1.20 m
|
0.9
|
SA21-536
|
60.70
|
61.70
|
1.00
|
36.10
|
30.3
|
31.70 g/t Au and 39.2
g/t Ag over 2.40 m
|
1.5
|
61.70
|
62.60
|
0.90
|
43.80
|
69.3
|
62.60
|
63.10
|
0.50
|
1.10
|
2.9
|
SA21-538 to
SA21-548
|
|
|
|
|
|
Pending
|
|
San
Albino
Pit
|
SA21-550
|
|
|
|
|
|
Pending
|
|
SA21-552
|
46.40
|
47.40
|
1.00
|
24.40
|
26.2
|
22.20 g/t Au and 23.1
g/t Ag over 3.80 m
|
3.3
|
47.40
|
48.30
|
0.90
|
1.70
|
6.6
|
48.30
|
49.40
|
1.10
|
2.41
|
5.0
|
49.40
|
50.20
|
0.80
|
69.70
|
62.7
|
SA21-553 to
SA22-574
|
|
|
|
|
|
Pending
|
|
The mineralized intervals shown above utilize a 1.0 g/t gold
cut-off grade with not more than 1.0 meter of internal dilution.
Widths are reported as drill core lengths. True width is estimated
from interpreted sections. In addition to the drill holes
presented in the table above, the following drill holes returned
only anomalous values: SA20-451, SA20-459, SA20-475, SA20-479,
SA20-482, SA20-484, SA20-485, SA20-487, SA20-488, SA20-491,
SA20-497, SA20-500, SA20-510, SA21-511, SA21-515, SA21-521,
SA21-523, SA21-525, SA21-526, SA21-528, SA21-534, SA21-537. In
addition to the drill holes presented in the table above, drill
hole SA20-474 did not intersect an interval with significant
values. The database with all drilling results to date is available
on the Company's website at www.makominingcorp.com
Table 2: Previously Released Drill Hole Results within SW
Pit
(Table contains only intervals not included in the
MDA Resource)
Drill
hole
|
From
(m)
|
To
(m)
|
Width
(m)
|
Au
(g/t)
|
Ag
(g/t)
|
Interval
Averages
|
Est. true
width
(m)
|
SA11-23
|
84.50
|
85.50
|
1.00
|
2.19
|
3.9
|
11.65 g/t Au and 16.5
g/t Ag over 3.50m
|
3.03
|
85.50
|
86.50
|
1.00
|
29.90
|
38.8
|
86.50
|
87.50
|
1.00
|
6.40
|
7.4
|
87.50
|
88.00
|
0.50
|
4.59
|
15.4
|
SA11-27
|
105.50
|
106.00
|
0.50
|
14.90
|
51.60
|
14.90 g/t Au and 51.6
g/t Ag over 0.50m
|
0.48
|
107.50
|
108.00
|
0.50
|
1.48
|
1.30
|
1.30 g/t Au and 1.9 g/t
Ag over 1.50m
|
1.15
|
108.00
|
109.00
|
1.00
|
1.21
|
2.20
|
138.50
|
139.50
|
1.00
|
29.90
|
30.20
|
29.90 g/t Au and 30.2
g/t Ag over 1.00m
|
0.87
|
267.00
|
268.50
|
1.50
|
2.40
|
1.60
|
2.40 g/t Au and 1.6 g/t
Ag over 1.50m
|
0.96
|
SA11-25
|
107.00
|
107.50
|
0.50
|
40.77
|
64.90
|
14.76 g/t Au and 25.1
g/t Ag over 2.00m
|
1.88
|
107.50
|
108.00
|
0.50
|
12.77
|
25.90
|
108.00
|
109.00
|
1.00
|
2.74
|
4.70
|
116.50
|
118.00
|
1.50
|
2.72
|
9.30
|
2.72 g/t Au and 9.3 g/t
Ag over 1.50m
|
1.36
|
SA11-28
|
95.50
|
96.00
|
0.50
|
4.19
|
16.10
|
4.19 g/t Au and 16.1
g/t Ag over 0.50m
|
0.43
|
116.50
|
117.50
|
1.00
|
1.28
|
3.20
|
1.28 g/t Au and 3.2 g/t
Ag over 1.00m
|
0.91
|
119.00
|
120.00
|
1.00
|
1.30
|
6.10
|
1.30 g/t Au and 6.1 g/t
Ag over 1.00m
|
0.98
|
SA11-29
|
110.00
|
110.50
|
0.50
|
4.97
|
101.30
|
4.97 g/t Au and 101.3
g/t Ag over 0.50m
|
0.37
|
118.50
|
119.00
|
0.50
|
4.61
|
3.90
|
6.48 g/t Au and 10.9
g/t Ag over 1.50m
|
1.43
|
119.00
|
119.50
|
0.50
|
0.30
|
0.90
|
119.50
|
120.00
|
0.50
|
14.52
|
27.90
|
126.50
|
127.00
|
0.50
|
9.38
|
20.30
|
4.43 g/t Au and 7.1 g/t
Ag over 2.00m
|
1.97
|
127.00
|
128.00
|
1.00
|
0.27
|
2.20
|
128.00
|
128.50
|
0.50
|
7.80
|
3.70
|
176.00
|
176.50
|
0.50
|
107.82
|
84.60
|
107.82 g/t Au and 84.6
g/t Ag over 0.50m
|
0.49
|
SA12-62
|
31.55
|
32.50
|
0.95
|
2.84
|
4.10
|
2.84 g/t Au and 4.1 g/t
Ag over 0.95m
|
0.82
|
41.00
|
42.00
|
1.00
|
1.78
|
2.20
|
1.78 g/t Au and 2.2 g/t
Ag over 1.00m
|
0.87
|
182.50
|
183.50
|
1.00
|
7.01
|
4.80
|
7.01 g/t Au and 4.8 g/t
Ag over 1.00m
|
0.77
|
306.15
|
307.00
|
0.85
|
9.86
|
44.70
|
6.76 g/t Au and 25.2
g/t Ag over 2.55m
|
2.49
|
307.00
|
308.00
|
1.00
|
7.80
|
20.40
|
308.00
|
308.70
|
0.70
|
1.51
|
8.20
|
SA12-67
|
169.50
|
170.50
|
1.00
|
3.57
|
5.80
|
33.89 g/t Au and 26.9
g/t Ag over 2.55m
|
2.43
|
170.50
|
171.00
|
0.50
|
22.16
|
34.70
|
171.00
|
171.50
|
0.50
|
125.12
|
82.10
|
171.50
|
172.05
|
0.55
|
16.74
|
7.80
|
SA12-68
|
184.70
|
185.50
|
0.80
|
31.96
|
100.10
|
30.25 g/t Au and 70.7
g/t Ag over 1.30m
|
1.26
|
185.50
|
186.00
|
0.50
|
27.52
|
23.60
|
188.00
|
189.20
|
1.20
|
1.03
|
3.80
|
1.03 g/t Au and 3.8 g/t
Ag over 1.20m
|
1.13
|
200.50
|
201.50
|
1.00
|
6.03
|
22.10
|
6.03 g/t Au and 22.1
g/t Ag over 1.00m
|
0.97
|
SA12-70
|
151.00
|
152.00
|
1.00
|
1.92
|
4.10
|
1.92 g/t Au and 4.1 g/t
Ag over 1.00m
|
0.87
|
181.25
|
182.30
|
1.05
|
18.30
|
49.10
|
42.10 g/t Au and 48.4
g/t Ag over 1.55m
|
1.46
|
182.30
|
182.80
|
0.50
|
92.08
|
46.90
|
184.50
|
185.15
|
0.65
|
6.70
|
10.80
|
6.70 g/t Au and 10.8
g/t Ag over 0.65m
|
0.52
|
213.00
|
214.00
|
1.00
|
1.06
|
3.90
|
1.06 g/t Au and 3.9 g/t
Ag over 1.00m
|
0.77
|
SA13-107
|
177.50
|
179.00
|
1.50
|
8.22
|
18.10
|
8.22 g/t Au and 18.1
g/t Ag over 1.50m
|
1.36
|
184.40
|
185.40
|
1.00
|
62.68
|
81.80
|
62.68 g/t Au and 81.8
g/t Ag over 1.00m
|
0.98
|
188.50
|
189.50
|
1.00
|
1.89
|
3.90
|
1.89 g/t Au and 3.9 g/t
Ag over 1.00m
|
0.87
|
281.00
|
282.00
|
1.00
|
5.36
|
18.30
|
5.36 g/t Au and 18.3
g/t Ag over 1.00m
|
0.94
|
298.00
|
299.00
|
1.00
|
3.44
|
5.10
|
3.44 g/t Au and 5.1 g/t
Ag over 1.00m
|
0.91
|
SA13-108
|
57.60
|
58.50
|
0.90
|
6.08
|
30.30
|
6.08 g/t Au and 30.3
g/t Ag over 0.90m
|
0.82
|
183.50
|
185.00
|
1.50
|
21.02
|
22.30
|
21.02 g/t Au and 22.3
g/t Ag over 1.50m
|
1.30
|
Sampling, Assaying, QA/QC and Data Verification
Drill core was continuously sampled from inception to
termination of the entire drill hole. Sample intervals were
typically one meter. Drill core diameter was HQ (6.35
centimeters). Geologic and geotechnical data was captured into
a digital database, core was photographed, then one-half split of
the core was collected for analysis and one-half was retained in
the core library. Trench and surface channel samples followed a
similar procedure as drill core sampling. Continuous samples
were collected using a diamond saw or rock hammer and chisel. Care
was taken to ensure a consistent channel width of 6 cm wide and 5
cm depth. Individual channel samples range from 0.4 meters to 1.0
meters in length. Both drill core and channel samples were kept in
a secured logging and storage facility until such time that they
were delivered to the Managua
facilities of Bureau Veritas and pulps were sent to the Bureau
Veritas laboratory in Vancouver
for analysis. Gold was analyzed by standard fire assay fusion,
30 gram aliquot, AAS finish. Samples returning over 10.0 g/t
gold are analyzed utilizing standard Fire Assay-Gravimetric
method. The Company follows industry standards in its
QA&QC procedures. Control samples consisting of duplicates,
standards and blanks were inserted into the sample stream at a
ratio of 1 control sample per every 10 samples. Analytical
results of control samples confirmed reliability of the assay
data.
Equity Compensation Grants
The Company also announces that it has granted an aggregate of
1,503,800 Restricted Share Units ("RSUs") to certain executive
officers of the Company and an aggregate of 494,400 Deferred Share
Units ("DSUs") to the non-executive directors of the Company under
the terms of the Company's Omnibus Incentive Plan (the
"Plan"). Each RSU and DSU represents the right to receive,
once vested, one common share in the capital of the Company (the
"Shares") or the cash equivalent thereof, as may be determined in
the discretion of the board of directors of the Company pursuant to
the terms of the Plan. The DSUs vest upon termination of services
of the participant, and the RSUs vest as to (i)
50% on January 31, 2023; (ii) 25% on December
31, 2024; and (iii) 25% on December 1, 2024.
Qualified Person
John M. Kowalchuk, P.Geo, a
geologist and qualified person (as defined under NI 43-101) has
read and approved the technical information contained in this press
release. Mr. Kowalchuk is a senior geologist and a consultant to
the Company.
On behalf of the Board,
Akiba
Leisman
CEO
About Mako
Mako Mining Corp. is a publicly listed gold mining, development
and exploration company. The Company operates the high-grade
San Albino gold mine in Nueva
Segovia, Nicaragua, which
ranks as one of the highest-grade open pit gold mines
globally. Mako's primary objective is to operate San Albino
profitably and fund exploration of prospective targets on its
district-scale land package.
Forward-Looking Information: Statements
contained herein, other than historical fact, may be considered
"forward-looking information" within the meaning of applicable
securities laws. The forward-looking information contained herein
is based on the Company's plans and certain expectations and
assumptions, including that management believes that an
increase in the mineral resources at both the West Pit and SW Pit
areas at San Albino is likely as a result of the drilling
program; that two drill rigs are scheduled to arrive at site
later this week to accelerate the San Albino drilling and the
Company's plans to increase the total rig count to 8; the Company
will release new and pending results once received;; and that the
Company can operate San Albino profitably in order to fund
exploration of prospective targets on its district-scale land
package. Such forward-looking information is subject to a variety
of risks and uncertainties which could cause actual events or
results to differ materially from those reflected in the
forward-looking information, including, without limitation, the
risk that the ongoing results of the drilling program do not result
in a significant increase in mineral resources at the West Pit and
the SW Pit areas; there is a delay in the arrival of the additional
drill rigs; the Company is unable to operate San Albino profitably
and/or fund its exploration of prospectus targets on its
district-scale land package; political risks and uncertainties
involving the Company's exploration properties; the inherent
uncertainty of cost estimates and the potential for unexpected
costs and expense; commodity price fluctuations and other risks and
uncertainties as disclosed in the Company's public disclosure
filings on SEDAR at www.sedar.com. Such information contained
herein represents management's best judgment as of the date hereof,
based on information currently available and is included for the
purposes of providing investors with the Company's expectations
regarding the Company's drilling program at San Albino gold
project, and may not be appropriate for other purposes. Mako does
not undertake to update any forward-looking information, except in
accordance with applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
View original content to download
multimedia:https://www.prnewswire.com/news-releases/expansion-drilling-at-san-albino-intersects-22-2-gt-gold-over-3-3-meters-estimated-true-width-and-31-7-gt-gold-over-1-55-meters-estimated-true-width-along-strike-to-the-northeast-and-southwest-of-the-resource-pit-shell-301473692.html
SOURCE Mako Mining Corp.