VANCOUVER, BC, Feb. 21,
2024 /CNW/ - NGEx Minerals Ltd. (TSXV:
NGEX) ("NGEx", "NGEx Minerals" or the "Company") is pleased
to report remaining drill results from hole DPDH010 and full
results for holes DPDH011 and DPDH014 from the Lunahuasi Project
located in the Vicuña District in San Juan Province, Argentina. Lunahuasi drilling continues to
intersect long, bonanza-grade mineralized intervals in a zone which
remains open in all directions. View PDF
Highlights
- Drillhole DPDH010 intersected several mineralized
intervals:
-
- 102.0 metres ("m") at 4.56% copper equivalent ("CuEq")
from 192.0m (previously reported),
including
-
-
- 62.6m at 5.84% CuEq from
226.0m, including
-
-
-
- 9.4m at 12.10% CuEq from
232.0m, plus
- 4.2m at 19.70% CuEq from
282.2m, plus
-
- 460.9m at 1.09% CuEq from
609.3m (new), including
-
-
- 4.5m at 25.95% CuEq from
609.3m, plus
- 1.9m at 10.57% CuEq from
764.5m, plus
- 5.8m at 6.81% CuEq from
834.3m
-
- Drill results down to a depth of 355.3m were previously reported on January 8, 2024.
- Drillhole DPDH011 intersected 46.0m at 2.06% CuEq from 330.0m, including
-
- 10.0m at 3.42% CuEq from
330.0m.
- Drillhole DPDH014 intersected several mineralized
intervals:
-
- 184.2m at 4.61% CuEq from
166.0m, including
-
-
- 71.9m at 9.63% CuEq from
171.2m, including
-
-
-
- 23.0m at 23.02% CuEq from
220.0m, including
-
-
-
-
- 9.4m at 40.12% CuEq from
231.7m, plus
-
- 28.0m at 5.44% CuEq from
533.0m, plus
- 10.9m at 4.39% CuEq from
722.4m, plus
- 6.4m at 8.82% CuEq from
953.6m.
- Estimated true widths of the intersections and breakdown of
individual metal grades are shown in Table 1 below.
- Plan view maps of Lunahuasi drill holes to date are attached to
the end of this news release.
Wojtek Wodzicki, President and
CEO, commented, "Lunahuasi continues to exceed our expectations and
these new holes have delivered some of the longest, highest-grade,
combined copper, gold and silver intersections seen globally for a
long time. The deposit remains open in all directions and is
rapidly turning into a major new discovery. In addition to the high
grades in individual structures, we are starting to see longer
intervals of stockwork and disseminated mineralization towards the
western part of the deposit."
Table 1: Significant Intercepts
Hole
ID
|
From
(m)
|
To
(m)
|
Length
(m)
|
Est True
Width
(m)
|
Cu
(%)
|
Au
(g/t)
|
Ag
(g/t)
|
CuEq
(%)
|
DPDH010
|
121.5
|
125.2
|
3.7
|
2.3
|
3.59
|
6.09
|
85.9
|
8.79
|
plus
|
157.0
|
164.5
|
7.5
|
4.7
|
0.98
|
0.68
|
31.3
|
1.75
|
plus
|
192.0
|
294.0
|
102.0
|
64.3
|
2.45
|
1.71
|
97.3
|
4.56
|
incl
|
192.0
|
198.3
|
6.3
|
3.9
|
2.22
|
1.63
|
69.0
|
4.02
|
and incl
|
204.0
|
211.0
|
7.0
|
4.4
|
3.40
|
1.64
|
56.7
|
5.10
|
and incl
|
226.0
|
288.6
|
62.6
|
39.4
|
3.10
|
2.09
|
138.3
|
5.84
|
incl
|
232.0
|
241.4
|
9.4
|
5.9
|
4.86
|
4.49
|
450.2
|
12.10
|
and incl
|
271.0
|
288.6
|
17.6
|
11.1
|
5.31
|
2.05
|
165.2
|
8.26
|
incl
|
282.2
|
286.4
|
4.2
|
2.6
|
12.12
|
4.33
|
503.4
|
19.70
|
plus
|
355.3
|
358.8
|
3.5
|
2.2
|
4.97
|
6.07
|
55.6
|
9.88
|
plus
|
490.0
|
500.0
|
10.0
|
6.3
|
2.34
|
1.13
|
29.4
|
3.42
|
plus
|
609.3
|
1,070.2
|
460.9
|
290.4
|
0.64
|
0.35
|
22.2
|
1.09
|
incl
|
609.3
|
613.8
|
4.5
|
2.8
|
5.97
|
11.21
|
1,341.2
|
25.95
|
and incl
|
720.5
|
725.0
|
4.5
|
2.8
|
3.48
|
0.41
|
15.2
|
3.92
|
and incl
|
764.5
|
766.3
|
1.9
|
1.2
|
9.79
|
0.68
|
32.0
|
10.57
|
and incl
|
834.3
|
840.0
|
5.8
|
3.6
|
5.04
|
1.00
|
119.0
|
6.81
|
DPDH011
|
168.0
|
182.0
|
14.0
|
7.0
|
0.28
|
1.17
|
7.0
|
1.19
|
plus
|
330.0
|
376.0
|
46.0
|
23.0
|
0.81
|
1.50
|
16.9
|
2.06
|
incl
|
330.0
|
340.0
|
10.0
|
5.0
|
1.95
|
1.63
|
31.6
|
3.42
|
DPDH014
|
60.0
|
75.0
|
15.0
|
7.7
|
1.68
|
0.65
|
49.0
|
2.58
|
plus
|
166.0
|
350.2
|
184.2
|
93.9
|
2.85
|
2.15
|
22.3
|
4.61
|
incl
|
171.2
|
243.0
|
71.9
|
36.6
|
5.79
|
4.70
|
46.9
|
9.63
|
incl
|
171.2
|
175.0
|
3.8
|
2.0
|
6.51
|
12.08
|
39.9
|
15.67
|
and incl
|
193.0
|
196.0
|
3.0
|
1.5
|
9.16
|
2.76
|
58.5
|
11.69
|
and incl
|
220.0
|
243.0
|
23.0
|
11.7
|
14.68
|
9.95
|
123.1
|
23.02
|
incl
|
231.7
|
241.1
|
9.4
|
4.8
|
27.68
|
14.13
|
242.4
|
40.12
|
plus
|
502.6
|
504.6
|
2.0
|
1.0
|
10.41
|
1.79
|
47.0
|
12.12
|
plus
|
533.0
|
960.0
|
427.0
|
217.8
|
0.76
|
0.29
|
13.5
|
1.09
|
incl
|
533.0
|
561.0
|
28.0
|
14.3
|
3.00
|
1.87
|
122.4
|
5.44
|
incl
|
631.9
|
634.1
|
2.2
|
1.1
|
5.36
|
0.97
|
94.0
|
6.89
|
incl
|
722.4
|
733.3
|
10.9
|
5.6
|
2.99
|
1.76
|
12.5
|
4.39
|
incl
|
884.0
|
886.6
|
2.6
|
1.3
|
2.62
|
0.82
|
116.2
|
4.24
|
incl
|
953.6
|
960.0
|
6.4
|
3.3
|
7.42
|
0.72
|
98.4
|
8.82
|
Copper equivalent
for drill intersections is calculated based on US$3.00/lb Cu,
US$1,500/oz Au and US$18/oz Ag, with 80% metallurgical recoveries
assumed for all metals. The formula is: CuEq % = Cu % + (0.7292 *
Au g/t) + (0.0088 * Ag g/t). True widths are estimated based on a
preliminary geological interpretation and are subject to change as
more information is acquired and the geological interpretation is
refined.
|
DPDH010 was reported to a depth of 355.3m on January 8,
2024. The hole was collared on Section 6225N and drilled to
the west at an angle of -55 degrees to a total depth of
1,070.2m. The 62.6m intersection from 226.0m is interpreted to be the same structure
drilled in holes DPDH002 (212.0m to
272.0m) and DSDH009 (144.0m to 272.3m).
Mineralized structures below 288.6m
cannot yet be reliably correlated with adjacent holes due to
distances between holes and incomplete assay data for adjacent
holes.
DPDH011 was collared 80m
northeast of DPDH010 on Section 6275N and drilled to the west at an
angle of -62 degrees to a total depth of 419m. The hole intersected 3 discrete mineralized
structures.
DPDH014 was collared 50m
east and 50m south of DPDH007 on
Section 6225N and drilled to the west at -55 degrees to a total
depth of 976.8m, intended to test the
down-dip extent of the high-grade zone in DPDH007. A thick section
of high-grade mineralization from 171.2m to 243.0m
correlates very well with the zone in DPDH007 and is 90m away from it. Both intersections have high
precious metal grades, supporting the interpretation that they
represent the same zone. This zone remains open in all directions
beyond DPDH014. From 533m to
960m the hole intersected both
stockwork and disseminated mineralization and a series of discrete
high-grade structures.
Full assay results have now been reported for ten holes at
Lunahuasi (including six holes from last season) and drilling is
beginning to outline a significant copper, gold and silver deposit.
Mineralization has been intersected over:
- An east/west distance of 750m
from DPDH014 at 60.0m to DPDH010 at
1,070.2m;
- A north/south distance of 180m
from DPDH008 at 61.7m to DPDH002 at
648.0m;
- A vertical distance of 890m from
DPDH005 at 32.0m to DPDH005 at
989.0m.
The deposit remains open in all directions beyond these
dimensions.
Mineralization is remarkably consistent across this volume,
typically occurring as mixed coarse-grained pyrite, enargite and
lesser covellite, ranging from disseminations through semi-massive
and breccia-fill textures to massive sulphide zones up to several
metres in core length. There appears to be a transition from
discreet high-grade structures separated by unmineralized and
propylitically altered wall rock in the east towards higher
temperature alteration and stockwork and disseminated
mineralization to the west. This style of mineralization is
typified by DPDH010 between 609.3m
and 1,070.2m and DPDH014 from
533.0m to 960.0m and is comprised of almost continuous
alteration of the host rhyolite and andesite cut by an apparent
stockwork of massive sulphide veins ranging from 5cm to
5m thick.
Outlook
Drilling is continuing with four rigs currently active. Holes
DPDH001 through DPDH008 were completed and reported last season,
and four holes from the current season, DPDH009, DPDH010, DPDH011
and DPDH014 have now been reported. A total of 15,000m is planned for the current program with
8,614m drilled to date. In addition
to the holes reported here, five holes have been completed to date
(DPDH012 to 704.0m, DPDH013 to
1,033.4m, DPDH015 to 917.5m, DPDH016 to 773.0m and DPDH017 to 393.0m) and four holes are currently in progress
(DPDH018 at 1,052.0m, DPDH019 at
317.0m, DPDH020 at 233.0m and
DPDH021 at 143.5m). Assays have been
received for 3,485m of the current
program with the remainder pending. Assay results for completed
holes will be released as they are received, analyzed, and
confirmed by the Company.
Table 2: Drill Hole Information
Hole
ID
|
East
|
North
|
Elev
(masl)
|
Azimuth
|
Dip
|
Length
(m)
|
Status
|
DPDH009
|
439040
|
6856277
|
4,683
|
263.59
|
-59.27
|
582.0
|
Completed
|
DPDH010
|
439035
|
6856223
|
4,684
|
269.75
|
-55.08
|
1,070.2
|
Completed
|
DPDH011
|
439090
|
6856275
|
4,658
|
270.22
|
-61.82
|
419.0
|
Completed
|
DPDH012
|
439195
|
6856275
|
4,626
|
269.55
|
-57.95
|
704.0
|
Completed
|
DPDH013
|
439090
|
6856224
|
4,663
|
272.42
|
-55.27
|
1,033.4
|
Completed
|
DPDH014
|
439190
|
6856224
|
4,634
|
270.71
|
-55.63
|
976.8
|
Completed
|
DPDH015
|
439040
|
6856224
|
4,682
|
268.77
|
-43.71
|
917.4
|
Completed
|
DPDH016
|
439140
|
6856125
|
4,659
|
270.48
|
-46.03
|
772.7
|
Completed
|
DPDH017
|
440255
|
6855875
|
4,542
|
134.97
|
-55.23
|
393.0
|
Completed
|
DPDH018
|
439214
|
6856000
|
4,705
|
283.78
|
-44.24
|
1,052.0
|
Ongoing
|
DPDH019
|
437555
|
6855951
|
5,358
|
069.83
|
-60.91
|
317.0
|
Ongoing
|
DPDH020
|
439294
|
6856188
|
4,657
|
266.75
|
-54.55
|
233.0
|
Ongoing
|
DPDH021
|
439222
|
6855912
|
4,743
|
265
|
-45
|
143.5
|
Ongoing
|
Qualified Persons and Technical
Notes
The scientific and technical disclosure included in this news
release have been reviewed and approved by Bob Carmichael, B.A.Sc., P.Eng. who is the
Qualified Person as defined by NI 43-101. Mr. Carmichael is Vice
President, Exploration for the Company.
Samples were cut at NGEx's operations base in San Juan,
Argentina by Company personnel.
Diamond drill core was sampled in maximum 2-meter intervals,
stopping at geological boundaries, using a rock saw. Core diameter
is a mix of PQ, HQ and NQ depending on the depth of the drill hole.
Samples were bagged, tagged and packaged for shipment by truck to
the ALS preparation laboratory in Mendoza, Argentina where they were crushed and a 500g
split was pulverized to 85% passing 200 mesh. The prepared sample
splits were sent to the ALS assay laboratory in either Lima, Peru or Santiago, Chile for copper, gold and silver
assays, and multi-element ICP. ALS is an accredited laboratory
which is independent of the Company. Gold assays were by fire assay
fusion with AAS finish on a 30g sample. Copper and silver were
assayed by atomic absorption following a 4-acid digestion. Samples
were also analyzed for a suite of 48 elements with ME-MS61 plus
mercury. Copper and gold standards as well as blanks and duplicates
(field, preparation, and analysis) were randomly inserted into the
sampling sequence for Quality Control. On average, 9% of the
submitted samples are Quality Control samples. No data quality
problems were indicated by the QA/QC program.
Copper equivalent for drill intersections is calculated based on
US$3.00/lb Cu, US$1,500/oz Au and US$18/oz Ag, with 80% metallurgical recoveries
assumed for all metals. The formula is: CuEq % = Cu % + (0.7292 *
Au g/t) + (0.0088 * Ag g/t). True widths are estimated based on a
preliminary geological interpretation and are subject to change as
more information is acquired and the geological interpretation is
refined.
About NGEx Minerals
NGEx Minerals is a copper and gold exploration company based in
Canada, focused on exploration of
the Lunahuasi copper-gold-silver project in San Juan Province,
Argentina, and the nearby Los
Helados copper-gold project located approximately nine kilometres
northeast in Chile's Region III.
Both projects are located within the Vicuña District, which
includes the Caserones mine, and the Josemaria and Filo del Sol
deposits.
NGEx Minerals owns 100% of Lunahuasi and is the majority partner
and operator for the Los Helados project, subject to a Joint
Exploration Agreement with Nippon Caserones Resources LLC, which is
the indirect 49% owner of the operating Caserones open pit copper
mine located approximately 17 kilometres north of Los Helados.
Lundin Mining Corporation holds the remaining 51% stake in
Caserones.
The Company is currently listed on the TSX Venture Exchange
("TSX-V") under the trading symbol "NGEX". NGEx Minerals is part of
the Lundin Group of Companies. On February
20, 2024, the Company announced that it had received
approval to list its shares on the TSX. NGEx's common shares will
commence trading on the TSX at market open on February 22, 2024. Once listed on the TSX, the
Company's common shares will be delisted from the TSX-V.
There will be no change in the trading symbol or CUSIP for the
common shares.
Additional information relating to NGEx Minerals Ltd. may be
obtained or viewed on the SEDAR+ website at www.sedarplus.ca.
Additional Information
Neither the TSX-V nor its Regulation Services Provider (as that
term is defined in the policies of the TSX-V) accepts
responsibility for the adequacy or accuracy of this news
release.
The information contained in this news release was accurate at
the time of dissemination but may be superseded by subsequent news
release(s). The Company is under no obligation, nor does it
intend to update or revise the forward-looking information, whether
as a result of new information, future events or otherwise, except
as may be required by applicable securities laws.
Cautionary Note Regarding
Forward-Looking Statements
Certain statements made and information contained herein in
the news release constitutes "forward-looking information" and
"forward-looking statements" within the meaning of applicable
securities legislation (collectively, "forward-looking
information"). All statements other than statements of historical
facts included in this document constitute forward-looking
information, including but not limited to, statements regarding:
the nature and timing of the work to be undertaken to advance the
Lunahuasi Project; the potential for the discovery of extensions of
mineralized zones at the Lunahuasi Project; the results of
exploration undertaken at new exploration targets identified at the
Lunahuasi Project; the ability of the Company to complete the
planned Lunahuasi program currently underway; and the timing and
nature of the current and future exploration and/or drill programs.
Words such as "plans", "expects" or "does not expect", "is
expected", "budget", "scheduled", "targets", "estimates",
"forecasts", "intends", "anticipates" or "does not anticipate", or
"believes", or variations of such words and phrases or statements
that certain actions, events, conditions or results "will", "may",
"could", "would", "might" or "will be taken", "occur" or "be
achieved" or the negative connotations thereof and similar
expressions identify forward-looking information.
Forward-looking information is necessarily based upon various
estimates and assumptions including, without limitation, the
expectations and beliefs of management with respect to the nature,
scope and timing of the work to be undertaken to advance the
Lunahuasi Project. While the Company anticipates completing its
planned program, it may encounter unexpected drilling and other
challenges, costs, or delays that could prevent the Company from
completing the program on the expected timeline or at all. Although
the Company believes that these factors and expectations are
reasonable as at the date of this document, in light of
management's experience and perception of current conditions and
expected developments, these statements are inherently subject to
significant business, economic and competitive uncertainties and
contingencies. Known and unknown risks, uncertainties and other
factors may cause actual results or events to differ materially
from those anticipated in such forward-looking statements and undue
reliance should not be placed on such statements and information.
Such factors include, without limitation: the emergence or
intensification of infectious diseases, such as COVID 19, and the
risk that such an occurrence globally, or in the Company's
operating jurisdictions and/or at its project sites in particular,
could impact the Company's ability to carry out the program and
could cause the program to be shut down; estimations of costs, and
permitting time lines; ability to obtain environmental permits,
surface rights and property interests in a timely manner; currency
exchange rate fluctuations; requirements for additional capital;
changes in the Company's share price; changes to government
regulation of mining activities; environmental risks; unanticipated
reclamation or remediation expenses; title disputes or claims;
limitations on insurance coverage, fluctuations in the current
price of and demand for commodities; material adverse changes in
general business, government and economic conditions in
Argentina; the availability of
financing if and when needed on reasonable terms; risks related to
material labour disputes, accidents, or failure of plant or
equipment; and other risks, uncertainties and other factors
identified in the Company's periodic filings with Canadian
securities regulators which are available on SEDAR+ at
www.sedarplus.ca under the Company's profile.
The forward-looking information contained in this news
release is based on information available to the Company as at the
date of this news release. Except as required under applicable
securities legislation, the Company does not undertake any
obligation to publicly update and/or revise any of the included
forward-looking information, whether as a result of additional
information, future events and/or otherwise. Forward-looking
information is provided for the purpose of providing information
about management's current expectations and plans and allowing
investors and others to get a better understanding of the Company's
operating environment. Although the Company has attempted to
identify important factors that would cause actual results to
differ materially from those contained in forward-looking
information, there may be other factors that cause results not to
be as anticipated, estimated, or intended. There can be no
assurance that such statements will prove to be accurate, as actual
results and future events could differ materially from those
anticipated in such statements. All the forward-looking information
contained in this document is qualified by these cautionary
statements. Readers are cautioned not to place undue reliance on
forward-looking information due to the inherent uncertainty
thereof.
Cautionary Note to U.S.
Readers
Information concerning the mineral properties of the Company
contained in this news release has been prepared in accordance with
the requirements of Canadian securities laws, which differ in
material respects from the requirements of securities laws of
the United States applicable to
U.S. companies subject to the reporting and disclosure requirements
of the United States Securities and Exchange Commission.
Figure 1: Lunahuasi Plan View With Surface Geology
Figure 2: Enlarged Lunahuasi Plan View With Surface
Geology
Copper equivalent is
calculated based on US$3.00/lb Cu, US$1,500/oz Au and US$18/oz Ag.
The formula is: CuEq % = Cu % + (0.7292 * Au g/t) + (0.0088 *
Ag g/t).
|
SOURCE NGEx Minerals Ltd.