Orosur Mining Inc - Pepas
continues to grow
·
Assays from three
more holes - exceptional results continue
o PEP016 - 43.7m @ 3.13 g/t
Au
o PEP017 - 40.2m @ 2.06 g/t
Au
o PEP018 - 54.1m @ 6.01 g/t Au
(from surface)
·
Geological
picture continues to develop.
London, January 13th, 2025. Orosur Mining Inc. ("Orosur" or the
"Company") (TSXV/AIM:OMI),
is pleased to announce an update on the progress of exploration
activities at the Company's flagship Anzá Project ("Project") in
Colombia.
ANZÁ Project
The Anzá Project is 100% owned by
the Company following recent completion of a Share Purchase
Agreement (SPA), announced 28th November 2024, whereby
the Company purchased all of the shares of its previous JV partner,
Minera Monte Aguila (MMA).
The Project is located 50km west of
Medellin and is easily accessible by all-weather roads and boasts
excellent infrastructure including water, power, communications as
well as a large exploration camp.
Pepas
The Pepas Prospect is in the
northern extent of the Anzá Project (pre-acquisition) over 10km
north of the central base at APTA (Figure 1).
Figure 1. Anzá Project
- prospects
Pepas was discovered by MMA in late
2021 by BLEG sampling and geological mapping, followed by 11
diamond drill holes in 2022 (PEP001 to PEP011).
On completion of the transaction to
buy MMA, the Company restarted drilling at the Pepas prospect in
mid-November 2024.
Drilling commenced with hole PEP012,
which was positioned to confirm previous high-grade results in
holes PEP001, PEP005 and PEP007 drilled by MMA in 2022.
Later holes (PEP013 to PEP015) were
then rotated some 51 degrees clockwise from PEP012 to begin to test
what was considered by Company geological teams to be the
controlling trend of SE to NW. The primary objective of the first
phase of drilling by the Company was to attempt to understand the
geological controls upon mineralisation first identified in 2022,
so as to provide guidance for later step out drilling.
Holes PEP012 to PEP015 (previously
announced) all intersected thick sequences of high-grade gold
mineralisation (table 2), and importantly, intersected a
well-defined basement fault that could be correlated from hole to
hole and thus provide clear guidance as to orientation.
Figure 2. Plan of
holes
Holes PEP016 and PEP017 were both
drilled downdip of previous holes, but at opposing ends of the
current mineralised zone, in order to test additional structural
complexities that were anticipated to the SW and to begin creating
several drill sections to aid in interpretation. PEP018 was then
drilled up dip of and on section with holes PEP013 and
PEP017.
Both PEP016 and PEP017 intersected
loose and broken ground from surface, likely as a result of both
holes being drilled through and sub-parallel to a large fault zone
running parallel to the known basement fault and converging at
depth. Drilling within this zone was difficult, with poor
recoveries, such that PEP017 was abandoned, and redrilled as
PEP017B from the same pad, with slightly shallower dip so as to
exit the fault zone earlier.
Some evidence of the existence of
this fault had been noted in surface mapping and these holes were
designed to test its location and nature to gain a better
understanding of the mineralisation.
Once leaving the fault zone, both
holes entered the mineralised zone and recorded substantial
intersections of gold mineralisation.
PEP018 was drilled immediately up
dip of PEP013 to extend the exceptional results recorded in this
previous hole. PEP018 entered high grade mineralisation from
surface, which continued until intersection of the expected
basement fault.
Drill intersections for these three
holes are as follows:
Hole Number
|
From (m)
|
To (m)
|
Interval
(m)
|
Au
(g/t)
|
PEP016
|
61.6
|
105.3
|
43.7
|
3.13
|
including
|
61.6
|
76.25
|
14.65
|
8.09
|
PEP017
|
56.1
|
96.3
|
40.2
|
2.06
|
including
|
56.1
|
64.15
|
8.05
|
4.42
|
including
|
74.35
|
78.6
|
4.25
|
8.3
|
PEP018
|
0
|
54.1
|
54.1
|
6.01
|
including
|
5.4
|
29.15
|
23.75
|
9.07
|
Table 1. Drill
Intercepts
Figure 3. Section,
PEP016
Fig 4 Section
PEP017B
Discussion and ongoing drilling
Holes PEP016, PEP017, and PEP018 are
adding to the geological picture in the centre of the Pepas
zone.
The holes drilled since the Company
took control of the Project less than six weeks ago, have confirmed
the Company's assertion that previous drilling in 2022, while
successful in discovering Pepas, did not resolve the orientation of
the mineralisation as most holes were drilled sub-parallel to what
is now thought to be the primary orientation.
Holes PEP016 and PEP017 were drilled
with the joint objectives of increasing the understanding of the
litho-structural framework of the deposit, with specific focus on a
fault that was expected in the SW of the area. A geological
picture is beginning to emerge of the current body of
mineralisation sitting within the keel of two roughly parallel
faults that converge at depth with a southerly plunge.
Hole PEP018 was drilled up dip of
hole PEP013 to complete a drill section. It was expected to return
an exceptional result and did not disappoint.
Hole PEP019 is located parallel to
PEP018, some 30m along strike to the SE (figure 2), to gradually
step out this mineralisation to the SE and to commence a new
section. This hole is currently underway.
Preliminary interpretation suggests
these two major faults are likely to post-date mineralisation.
Attention is thus being given to examining the sense of movement of
these structures and their potential impact in offsetting
mineralisation. Recent surface mapping and geochemistry results are
beginning to demonstrate substantial potential northward of the
current body and geological teams are currently expanding this work
with a view to developing new targets in addition to the definition
drill program currently underway at Pepas.
Since Orosur reassumed ownership and
control of the Anzá project in late November 2024, seven holes have
been drilled at the Pepas prospect, with all seven returning
outstanding gold intersections:
Hole Number
|
From (m)
|
To (m)
|
Interval
(m)
|
Au
(g/t)
|
PEP012
|
0
|
66.75
|
66.75
|
5.64
|
PEP013
|
0
|
77.30
|
77.30
|
7.68
|
PEP014
|
0
|
75.1
|
75.1
|
5.58
|
PEP015
|
23.5
|
63.7
|
40.2
|
3.75
|
PEP016
|
61.6
|
105.3
|
43.7
|
3.13
|
PEP017
|
56.1
|
96.3
|
40.2
|
2.06
|
PEP018
|
0
|
54.1
|
54.1
|
6.01
|
Table 2. Results to
date, post MMA transaction
Orosur CEO Brad George commented:
"Drilling at Pepas continues to
develop an exciting story. It has been less than six weeks and yet
we have achieved a huge amount, with seven holes drilled, all of
which have returned exceptional intersections. We will continue
expanding Pepas, but attention now also turns northward where
tantalising surface mapping is attracting our
attention."
For
further information, visit www.orosur.ca, follow on X @orosurm or
please contact:
Orosur Mining Inc
Louis Castro, Chairman,
Brad George, CEO
info@orosur.ca
Tel: +1
(778) 373-0100
SP
Angel Corporate Finance LLP - Nomad & Joint
Broker
Jeff Keating / Jen Clarke
Tel: +44 (0) 20 3470 0470
Turner Pope Investments (TPI) Ltd - Joint
Broker
Andy Thacker/James Pope
Tel: +44 (0)20 3657 0050
Flagstaff Communications and Investor
Communications
Tim Thompson
Mark Edwards
Fergus Mellon
orosur@flagstaffcomms.com
Tel: +44 (0)207 129 1474
The information contained within
this announcement is deemed by the Company to constitute inside
information as stipulated under the Market Abuse Regulations (EU)
No. 596/2014 ('MAR') which has been incorporated into UK law by the
European Union (Withdrawal) Act 2018. Upon the publication of this
announcement via Regulatory Information Service ('RIS'), this
inside information is now considered to be in the public
domain.
Neither TSX Venture
Exchange nor its Regulation Services Provider (as that term is
defined in policies of the TSX Venture Exchange) accepts
responsibility for the adequacy or accuracy of this
release.
Drill Hole Details - Pepas prospect 2022/2024
Programme*
Hole ID
|
Easting (m)
|
Northing (m)
|
Elevation asl
(m)
|
Dip
(°)
|
Azimuth (°)
|
PEP-001
|
403384
|
705000
|
1001
|
-50
|
150
|
PEP-002
|
403384
|
705000
|
1001
|
-60
|
290
|
PEP-003
|
403240
|
705142
|
1001
|
-49.60
|
95.2
|
PEP-004
|
403508
|
705671
|
838
|
-59.8
|
99.8
|
PEP-005
|
403373
|
704990
|
1008
|
-49.8
|
94.6
|
PEP-007
|
403374
|
704990
|
1008
|
-69.9
|
170
|
PEP-008
|
403232
|
704803
|
971
|
-50
|
60
|
PEP-009
|
403032
|
705057
|
1055
|
-50
|
80
|
PEP-010
|
403375
|
705106
|
982
|
-50.31
|
190.4
|
PEP-011
|
403573
|
704939
|
1001
|
-50.3
|
255
|
PEP-012
|
403415
|
704890
|
997
|
-56
|
352
|
PEP-013
|
403413
|
704887
|
997
|
-50
|
43
|
PEP-014
|
403400
|
704910
|
1007
|
-50
|
43
|
PEP-015
|
403375
|
704938
|
1017
|
-50
|
43
|
PEP-016
|
403326
|
704912
|
999
|
-50
|
43
|
PEP-017
|
403365
|
704848
|
976
|
-40
|
47
|
PEP-018
|
403345
|
704851
|
977
|
-45
|
43
|
PEP-019
|
403446
|
704890
|
991
|
-45
|
43
|
* Coordinates WGS84, UTM Zone 18
About Orosur Mining Inc.
Orosur Mining Inc. (TSXV: OMI; AIM:
OMI) is a minerals explorer and developer currently operating in
Colombia, Argentina and Nigeria.
About the Anzá Project
Anzá is a gold exploration project,
comprising three exploration licences, four exploration licence
applications, and several small exploitation permits, totalling
176km2 in the prolific Mid-Cauca belt of Colombia.
Post the acquisition of Minera Monte Aguila S.A.S,
the area of the Project has increased substantially to
approximately 400km2 due to the acquisition of a number of
additional applications that were owned by Minera Monte Aguila
S.A.S.
The Anzá Project is currently wholly
owned by Orosur via its subsidiaries, Minera Anzá S.A. and Minera
Monte Aquila S.A.S.
The project is located 50km west of
Medellin and is easily accessible by all-weather roads and boasts
excellent infrastructure including water, power, communications and
large exploration camp.
Qualified Persons Statement
The information in this news release
was compiled, reviewed and verified by Mr. Brad George, BSc Hons
(Geology and Geophysics), MBA, Member of the Australian Institute
of Geoscientists (MAIG), CEO of Orosur Mining Inc. and a qualified
person as defined by National Instrument 43-101.
Orosur Mining Inc. staff follow
standard operating and quality assurance procedures to ensure that
sampling techniques and sample results meet international reporting
standards.
Drill core is split in half over
widths that vary between 0.3m and 2m, depending upon the geological
domain. One half is kept on site in the Minera Anzá core storage
facility, with the other sent for assay.
Industry standard QAQC protocols are
put in place with approximately 10% of total submitted samples
being blanks, repeats or Certified Reference Materials
(CRMs).
Samples for holes PEP-001 to PEP-011
were sent to the Medellin preparation facility of ALS Colombia Ltd,
and then to the ISO 9001 certified ALS Chemex laboratory in Lima,
Peru.
Samples from PEP-012 onwards are sent
to Medellin laboratory of Actlabs for preparation and
assay.
30 gram nominal weight samples are
then subject to fire assay and AAS analysis for gold with
gravimetric re-finish for overlimit assays of >5 g/t.
ICP-MS Ultra-Trace level multi-element four-acid digest analyses
may also undertaken for such elements as silver, copper, lead and
zinc, etc.
Gold intersections are reported using
a lower cut-off of 0.3g/t Au over 3m.
Forward Looking Statements
All statements, other than
statements of historical fact, contained in this news release
constitute "forward looking statements" within the meaning of
applicable securities laws, including but not limited to the "safe
harbour" provisions of the United States Private Securities
Litigation Reform Act of 1995 and are based on expectations
estimates and projections as of the date of this news
release.
Forward-looking statements include,
without limitation, the continuing focus on the Pepas prospect, the
exploration plans in Colombia and the funding of those plans, and
other events or conditions that may occur in the future. There can
be no assurance that such statements will prove to be accurate.
Actual results and future events could differ materially from those
anticipated in such forward-looking statements. Such statements are
subject to significant risks and uncertainties including, but not
limited to those described in the Section "Risks Factors" of the
Company's MD&A for the year ended May 31, 2024. The Company's
continuance as a going concern is dependent upon its ability to
obtain adequate financing, to reach profitable levels of operations
and to reach a satisfactory closure of the Creditor´s Agreement in
Uruguay. These material uncertainties may cast significant doubt
upon the Company's ability to realize its assets and discharge its
liabilities in the normal course of business and accordingly the
appropriateness of the use of accounting principles applicable to a
going concern. The Company disclaims any intention or obligation to
update or revise any forward-looking statements whether as a result
of new information, future events and such forward-looking
statements, except to the extent required by applicable
law.