TIDMSOLG
RNS Number : 5486T
SolGold PLC
15 November 2019
15 November 2019
SolGold plc
("SolGold" or the "Company")
Drilling commenced at the Blanca Project in Northern
Ecuador,
First two holes both intersect visible gold in multiple quartz
veins at Cielito
The Board of SolGold (LSE & TSX code: SOLG) provides an
exploration update on the Blanca Project in Northern Ecuador. The
Blanca Project is located approximately 8kms north-northwest from
SolGold's flagship Cascabel Project, and is held by Carnegie Ridge
Resources SA, a 100% owned subsidiary of SolGold Plc.
HIGHLIGHTS:
Ø Man-portable drill machine has been on site at the Blanca
Project since mid-September testing the very high grade
sub-horizontal veins, up to 0.4m wide, containing up to 617 g/t Au,
at the Cielito Vein System.
Ø First hole (BDH_19_001) intersected a 30cm wide mineralised
vein with visible gold along with multiple thin sulphide rich veins
and mineralised fault zones.
Ø Phase 1 drilling program designed to test high grade
polymetallic gold-telluride veins within the Cielito Vein System
over a 500m by 400m zone, as well as gold-stockwork veining at the
Cerro Quiroz Dome.
Ø Initial drilling supports the conceptual mineralising model
that the Cielito Vein System consists of multiple stacked gold
lenses with potential sub-vertical bonanza style feeder zones.
Ø Cerro Quiroz Dome is interpreted to represent an extensively
silicified topographic dome containing gold-stockwork veining up to
6.8 g/t gold over a 700m by 300m area.
Ø Additional rock chip sampling of the Cielito vein in artisanal
workings and tunnels confirms the potential of the Blanca Project
with outstanding high-grade gold results, including:
-- R01000676 540 g/t Au, 107 g/t Ag, 0.28% Cu;
-- R01000677 545 g/t Au, 286 g/t Ag, 0.45% Cu;
-- R01000678 392 g/t Au, 190 g/t Ag;
-- R01000684 432 g/t Au, 159 g/t Ag;
-- R01000715 428 g/t Au, 212 g/t Ag.
Ø The average grade of recent samples taken of the Cielito vein
was 262 g/t Au over a 270m by 150m area from a total of 17 rock
samples
References to figures and tables relate to the version visible
in PDF format by clicking the link below:
http://www.rns-pdf.londonstockexchange.com/rns/5486T_1-2019-11-15.pdf
Introduction
SolGold continues to explore its extensive tenement portfolio in
Ecuador with the goal of becoming a Tier 1 copper and gold
producing company. SolGold operates multiple regional field teams
rapidly exploring and assessing 75 regional concessions across 14
provinces in Ecuador. Thus far a group of 12 high value targets
have been assessed to have world class potential.
The priority Blanca Project is located in northern Ecuador,
approximately 8km north-northwest of SolGold's flagship Cascabel
Project. The Blanca Project lies on the prolific Andean Copper belt
which is renowned as the production base for nearly half of the
world's copper (Figure 1). SolGold holds a 100% interest over the
Blanca Project through its Ecuadorean subsidiary company, Carnegie
Ridge Resources S.A.
Drilling Commenced
SolGold received all regulatory licencing approvals to begin
scout drilling at the Blanca Project marking the establishment of
advanced exploration in Ecuador's newest Copper-Gold Province.
A man-portable drill machine is currently on site and has
completed 2 diamond drill holes for 800m testing the very high
grade sub-horizontal veins, up to 0.4m wide, containing up to
617g/t Au, at the Cielito Vein System.
The Phase 1 drilling program comprises a suite of initial drill
holes to test high grade polymetallic gold-telluride veins within
the Cielito Vein System, as well as a second suite of drill holes
to test gold-stockwork veining at the Cerro Quiroz Dome (Figure
2).
The first hole BDH_19_001 intersected a 30cm wide quartz vein
containing visible gold and rich in chalcopyrite and pyrite at a
down-hole depth of 98m (Photo 1 & 2). The first 150m is
characterised by andesites and volcanic breccias with multiple
zones of thin sulphide-rich veins and mineralised fault zones.
Chlorite-epidote propylitic alteration increases in strength at
depth possibly signifying proximity to a source intrusion.
Visible gold was also noted in the second hole BDH_19_002 (Photo
3), drilled on the same section as BDH_19_001 at a shallower dip.
This hole also intersected multiple zones of flat dipping, thin
sulphide rich quartz veins in the first 170m. Structural
correlation between the holes supports the conceptual model of a
system of stacked mineralised quartz veins at the Cielito
prospect.
The Cielito Vein System is interpreted to represent multiple
stacked gold lenses over a 500m by 400m zone, and drilling is
intended to intercept these lenses as well as potential
sub-vertical high-grade feeder zones.
The Cielito Vein System is located along a northeast-southwest
trending structural corridor traversing the concession. The vein
system extends over a 400m by 500mm zone and contains over 120
pre-existing artisanal workings within the project area (Photo
4).
Mineralisation is hosted within volcanic sediments, agglomerates
and breccias and rock chip sampling of exposed veins previously
returned very high-grade gold mineralisation including:
-- 617g/t Au, 0.59% Cu, 317g/t Ag, >500ppm Te, 0.74% Zn;
-- 542g/t Au, 0.54% Cu, 254g/t Ag, >500ppm Te, 0.50% Zn;
-- 269 g/t Au, 133 g/t Ag;
-- 116 g/t Au, 64.9 g/t Ag;
-- 144.5 g/t Au.
Structural mapping has recognised the potential for multiple
flat lying stacked polymetallic sulphide veins at the Cielito
prospect (Photo 2 & 3), and the newly identified artisanal gold
workings on the opposing ridge provide evidence for an extensive
mineralised vein system.
The Cerro Quiroz Dome is interpreted to represent an extensively
silicified topographic dome containing gold-stockwork veining up to
6.8g/t gold over a 700m by 300m area, and it is interpreted that
the two target areas may be genetically related at depth.
Systematic drill testing of both the Cielito and Cerro Quiroz
prospects is planned.
New Cielito Rock Chip Results
Carnegie geologists have accessed underground artisanal workings
and tunnels to sample the Cielito vein (Table 1). The results of
this sampling are outstanding with high grade gold along with
significant silver and base metal results. Samples were taken over
an area 270m by 150m of sulphide-rich gold and base veins. These
flat lying veins (Figure 2) potentially form part of a larger
intrusion-related stacked vein system similar in style to the
Buritica deposit (6.4M oz Au) in Columbia.
Best results received from the recent sampling program of 17
samples of the Cielito vein include:
-- R01000676 540 g/t Au, 107 g/t Ag, 0.28% Cu, 351 ppm Te
-- R01000677 545 g/t Au, 286 g/t Ag, 0.45% Cu, >500 ppm Te
-- R01000678 392 g/t Au, 190 g/t Ag, 402 ppm Te
-- R01000684 432 g/t Au, 159 g/t Ag, 438 ppm Te
-- R01000715 428 g/t Au, 212 g/t Ag, >500 ppm Te
-- R01000698 378 g/t Au, 185 g/t Ag, >500 ppm Te
-- R01000679 305 g/t Au, 135 g/t Ag, 382 ppm Te
Assays for results in this release have come from ALS
Laboratories in Lima, Peru.
Figure 1: Location of the Blanca Project, in Northern Ecuador,
in relation to the Cascabel Project.
Photo 1: The Cielito vein intersected in BDH_19_001 with visible
gold.
Photo 2: BDH001 - Visible gold in quartz vein 96.97m
downhole.
Photo 3: BDH_19_002 - Visible gold in quartz vein at 49m
downhole.
Photo 4: Examples of polymetallic gold-telluride veins at
existing underground artisanal workings at the Cielito Vein
System.
Figure 2: Plan showing the target zones at Cielito and Cerro
Quiroz as defined by surface gold in soil geochemistry and
alteration mapping (left) and by surface soil geochemical contours
(right).
Table 1: Significant results table (> over limit)
Table 2: Diamond drill hole collar coordinates
Market Abuse Regulation (MAR) Disclosure
Certain information contained in this announcement would have
been deemed inside information for the purposes of Article 7 of the
Regulation (EU) No 596/2014 until the release of this
announcement.
Qualified Person:
Information in this report relating to the exploration results
is based on data reviewed by Mr Jason Ward ((CP) B.Sc. Geol.), the
Chief Geologist of the Company. Mr Ward is a Fellow of the
Australasian Institute of Mining and Metallurgy, holds the
designation FAusIMM (CP), and has in excess of 20 years' experience
in mineral exploration and is a Qualified Person for the purposes
of the relevant LSE and TSX Rules. Mr Ward consents to the
inclusion of the information in the form and context in which it
appears.
By order of the Board
Karl Schlobohm
Company Secretary
CONTACTS
Nicholas Mather Tel: +61 (0) 7 3303 0665
SolGold Plc (Chief Executive Officer) +61 (0) 417 880 448
nmather@solgold.com.au
Karl Schlobohm
SolGold Plc (Company Secretary) Tel: +61 (0) 7 3303 0661
kschlobohm@solgold.com.au
Ingo Hofmaier
SolGold Plc (GM - Project & Corporate Tel: +44 (0) 20 3823 2131
Finance) ihofmaier@solgold.com.au
Gordon Poole / Nick Hennis
Camarco (Financial PR / IR) Tel: +44 (0) 20 3757 4997
solgold@camarco.co.uk
Andrew Chubb Tel: +44 (0) 20 7907 8500
Hannam & Partners (Joint Broker and Financial
Advisor)
solgold@hannam.partners
Ross Allister / David McKeown Tel: +44 (0)20 7418 8900
Peel Hunt (Joint Broker and Financial
Advisor)
solgold@peelhunt.com
James Kofman / Darren Wallace Tel: +1 416 943 6411
Cormark Securities Inc. (Financial Advisor)
dwallace@cormark.com
Follow us on twitter @SolGold_plc
ABOUT SOLGOLD
SolGold is a leading exploration company focussed on the
discovery and definition of world-class copper and gold deposits.
In 2018 SolGold's management team was recognised by the "Mines and
Money" Forum as an example of excellence in the industry, and
continues to strive to deliver objectives efficiently and in the
interests of shareholders. SolGold is the largest and most active
concession holder in Ecuador and is aggressively exploring the
length and breadth of this highly prospective and gold-rich section
of the Andean Copper Belt.
The Company operates with transparency and in accordance with
international best practices. SolGold is committed to delivering
value to its shareholders, while simultaneously providing economic
and social benefits to impacted communities, fostering a healthy
and safe workplace and minimizing the environmental impact.
Dedicated stakeholders
SolGold employs a staff of over 560 and at least 98% are
Ecuadorean. This is expected to grow as the operations at Alpala,
and in Ecuador generally, expand. SolGold focusses its operations
to be safe, reliable and environmentally responsible and maintains
close relationships with its local communities. SolGold has engaged
an increasingly skilled and experienced team of geoscientists using
state of the art geophysical and geochemical modelling applied to
an extensive data base to enable the delivery of ore grade
intersections from nearly every drill hole at Alpala. SolGold has
86 geologists, of which 11% are female, on the ground in Ecuador
looking for copper and gold.
About Cascabel and Alpala
The Alpala deposit is the main target in the Cascabel
concession, located on the northern section of the heavily endowed
Andean Copper Belt, the entirety of which is renowned as the base
for nearly half of the world's copper production. The project area
hosts mineralisation of Eocene age, the same age as numerous Tier 1
deposits along the Andean Copper Belt in Chile and Peru to the
south. The project base is located at Rocafuerte within the
Cascabel concession in northern Ecuador, an approximately three
hour drive on sealed highway north of Quito, close to water, power
supply and Pacific ports (Figure 1).
Having fulfilled its earn-in requirements, SolGold is a
registered shareholder with an unencumbered legal and beneficial
85% interest in ENSA (Exploraciones Novomining S.A.) which holds
100% of the Cascabel concession covering approximately 50km(2) .
The junior equity owner in ENSA is required to repay 15% of costs
since SolGold's earn in was completed, from 90% of its share of
distribution of earnings or dividends from ENSA or the Cascabel
concession. It is also required to contribute to development or be
diluted, and if its interest falls below 10%, it shall reduce to a
0.5% NSR royalty which SolGold may acquire for US$3.5m.
Over 228,000m of diamond drilling has been completed on the
project. With numerous rigs currently active on the project,
SolGold produces up to approximately 10,000m of core every month.
The Cascabel drill program is currently focussed on extending and
upgrading the status of the Alpala Resource, as well as further
drill testing of the rapidly evolving Aguinaga prospect. Drill
testing of the Trivinio target has commenced, whilst the numerous
other untested targets, namely at Moran, Cristal, Tandayama-America
and Chinambicito, are flagged for drill testing as overall program
demands allow.
The November 2018 Alpala MRE update, dated 15 November 2018, was
estimated from 68,173 assays. Drill core samples were obtained from
total of 133,576m of drilling comprising 128 diamond drill holes,
including 75 drill holes comprising, 34 daughter holes, 8 redrills,
and 11 over-runs, and represents full assay data from holes 1-67
and partial assay data received from holes 68 to 75. In contrast,
the Dec 2017 Maiden MRE was estimated from 26,814 assays obtained
from 53,616m of drilling comprising 45 drill holes, including 10
daughter holes and 5 redrills.
The November 2018 Alpala updated Mineral Resource Estimate (MRE)
totals a current:
o 2,050 Mt @ 0.60% CuEq (at 0.2% CuEq cut-off) in the Indicated
category, and 900 Mt @ 0.35% CuEq (at 0.2% CuEq cut-off)
in the Inferred category.
o Contained metal content of 8.4 Mt Cu and 19.4 Moz Au in
the Indicated category.
o Contained metal content of 2.5 Mt Cu and 3.8 Moz Au in
the Inferred category.
Investors should consult the technical report dated 3 January
2019 for a detailed account of the assumptions on which the
estimates were based as well as any known legal, political,
environmental and other risks that could materially affect the
development of the resources.
Getting Alpala advanced towards development
The resource at the Alpala deposit boasts a high grade core
which, in the event of the construction of a mine, is targeted to
facilitate early cashflows and an accelerated payback of initial
capital. SolGold is currently investigating development and
financing options available to the company for the development of
Cascabel on reaching feasibility.
The results of the PEA were published on 20 May 2019,
highlighting the following key aspects:
Ø Net Present Value ("NPV") estimates range from US$4.1Bn
to US$4.5Bn (Real, post-tax, @ 8% discount rate, US$3.3/lb
copper price, US$1,300/oz gold price and US$16/oz silver
price) depending on production rate scenario.
Ø Internal Rate of Return ("IRR") estimates range from 24.8%
to 26.5% (Real, post-tax, US$3.3/lb copper price, US$1,300/oz
gold price and US$16/oz silver price) depending on production
rate scenario.
Ø Pre-production Capex estimated at approx. US$2.4B to US$2.8B,
and total Capex including life of mine sustaining Capex
of US$10.1B to US$10.5B depending on production rate scenario.
Ø Payback Period on initial start-up capital - Range from
3.5 to 3.8 years after commencement of production depending
on production rate scenario.
Ø Preferred Mining Method - Underground low-cost mass mining
using Block Cave methods applied over several caves designed
on two vertically extensive Lifts.
Full results and all details of the PEA are available in the
Company's market release of 20 May 2019.
SolGold's regional push
SolGold is using its successful and cost efficient blueprint
established at Alpala, and Cascabel generally, to explore for
additional world class copper and gold projects across Ecuador.
SolGold is the largest and most active concessionaire in
Ecuador.
The Company wholly owns four other subsidiaries active
throughout the country that are now focussed on thirteen high
priority gold and copper resource targets, several of which the
Company believes have the potential, subject to resource definition
and feasibility, to be developed in close succession or even on a
more accelerated basis from Alpala.
SolGold is listed on the London Stock Exchange and Toronto Stock
Exchange (LSE/TSX: SOLG). SolGold is listed on the London Stock
Exchange and Toronto Stock Exchange (LSE/TSX: SOLG). The Company
has on issue a total of 1,846,321,033 fully-paid ordinary shares;
139,012,000 share options exercisable at 60p and 21,250,000 share
options exercisable at 40p.
See www.solgold.com.au for more information. Follow us on
twitter @SolGold_plc
CAUTIONARY NOTICE
News releases, presentations and public commentary made by
SolGold plc (the "Company") and its Officers may contain certain
statements and expressions of belief, expectation or opinion which
are forward looking statements, and which relate, inter alia, to
interpretations of exploration results to date and the Company's
proposed strategy, plans and objectives or to the expectations or
intentions of the Company's Directors. Such forward-looking and
interpretative statements involve known and unknown risks,
uncertainties and other important factors beyond the control of the
Company that could cause the actual performance or achievements of
the Company to be materially different from such interpretations
and forward-looking statements.
Accordingly, the reader should not rely on any interpretations
or forward-looking statements; and save as required by the exchange
rules of the TSX and LSE or by applicable laws, the Company does
not accept any obligation to disseminate any updates or revisions
to such interpretations or forward-looking statements. The Company
may reinterpret results to date as the status of its assets and
projects changes with time expenditure, metals prices and other
affecting circumstances.
This release may contain "forward--looking information" within
the meaning of applicable Canadian securities legislation.
Forward--looking information includes, but is not limited to,
statements regarding the Company's plans for developing its
properties. Generally, forward--looking information can be
identified by the use of forward-looking terminology such as
"plans", "expects" or "does not expect", "is expected", "budget",
"scheduled", "estimates", "forecasts", "intends", "anticipates" or
"does not anticipate", or "believes", or variations of such words
and phrases or state that certain actions, events or results "may",
"could", "would", "might" or "will be taken", "occur" or "be
achieved".
Forward--looking information is subject to known and unknown
risks, uncertainties and other factors that may cause the actual
results, level of activity, performance or achievements of the
Company to be materially different from those expressed or implied
by such forward--looking information, including but not limited to:
transaction risks; general business, economic, competitive,
political and social uncertainties; future prices of mineral
prices; accidents, labour disputes and shortages and other risks of
the mining industry. Although the Company has attempted to identify
important factors that could cause actual results to differ
materially from those contained in forward-looking information,
there may be other factors that cause results not to be as
anticipated, estimated or intended. There can be no assurance that
such information will prove to be accurate, as actual results and
future events could differ materially from those anticipated in
such statements. Accordingly, readers should not place undue
reliance on forward--looking information. The Company does not
undertake to update any forward-looking information, except in
accordance with applicable securities laws.
The Company and its officers do not endorse, or reject or
otherwise comment on the conclusions, interpretations or views
expressed in press articles or third-party analysis, and where
possible aims to circulate all available material on its
website.
The Company recognises that the term "World Class" is subjective
and for the purpose of the Company's projects the Company considers
the drilling results at the growing Alpala Porphyry Copper Gold
Deposit at its Cascabel Project to represent intersections of a
"World Class" deposit. The Company considers that "World Class"
deposits are rare, very large, long life, low cost, and are
responsible for approximately half of total global metals
production.
"World Class" deposits are generally accepted as deposits of a
size and quality that create multiple expansion opportunities, and
have or are likely to demonstrate robust economics that ensure
development irrespective of position within the global commodity
cycles, or whether or not the deposit has been fully drilled out,
or a feasibility study completed.
Standards drawn from industry experts (1) Singer and Menzie,
2010; (2) Schodde, 2006; (3) Schodde and Hronsky, 2006; (4) Singer,
1995; (5) Laznicka, 2010) have characterised "World Class" deposits
at prevailing commodity prices. The relevant criteria for "World
Class" deposits, adjusted to current long run commodity prices, are
considered to be those holding or likely to hold more than 5
million tonnes of copper and/or more than 6 million ounces of gold
with a modelled net present value of greater than USD 1
Billion.
The Company and its external consultants prepared an updated
mineral resource estimate at the Cascabel Project in November 2018.
Results are summarised in Table B attached.
Any development or mining potential for the project remains
speculative.
Drill hole intercepts have been updated to reflect current
commodity prices, using a data aggregation method, defined by
copper equivalent cut-off grades and reported with up to 10m
internal dilution, excluding bridging to a single sample. Copper
equivalent grades are calculated using a gold conversion factor of
0.63, determined using an updated copper price of USD3.00/pound and
an updated gold price of USD1300/ounce. True widths of down hole
intersections are estimated to be approximately 25-70%.
On the basis of the drilling results to date and the results of
the Alpala Maiden Mineral Resource Estimate, the reference to the
Cascabel Project as "World Class" (or "Tier 1") is considered to be
appropriate. Examples of global copper and gold discoveries since
2006 that are generally considered to be "World Class" are
summarised in Table A.
References cited in the text:
1. Singer, D.A. and Menzie, W.D., 2010. Quantitative Mineral
Resource Assessments: An Integrated Approach. Oxford University
Press Inc.
2. Schodde, R., 2006. What do we mean by a world class deposit?
And why are they special. Presentation. AMEC Conference,
Perth.
3. Schodde, R and Hronsky, J.M.A, 2006. The Role of World-Class
Mines in Wealth Creation. Special Publications of the Society
of Economic Geologists Volume 12.
4. Singer, D.A., 1995, World-class base and precious metal
deposits-a quantitative analysis: Economic Geology, v.
90, no.1, p. 88-104.
5. Laznicka, P., 2010. Giant Metallic Deposits: Future Sources
of Industrial Metal, Second Edition. Springer-Verlag Heidelberg.
Deposit Discovery Major Country Current Status Mining Inventory
Name Year Metals Style
LA COLOSA 2006 Au, Cu Colombia Feasibility Open Pit (1) 469Mt
- New Project @ 0.95g/t
Au; 14.3Moz
Au
============= =========== ============ ========================= =============== ===============
LOS SULFATOS 2007 Cu, Mo Chile Advanced Exploration Underground (2) 1.2Bt
@1.46% Cu
& 0.02% Mo;
17.5Mt Cu
============= =========== ============ ========================= =============== ===============
BRUCEJACK 2008 Au Canada Development/Construction Open Pit (3) 15.6Mt
@ 16.1 g/t
Au; 8.1Moz
Au
============= =========== ============ ========================= =============== ===============
KAMOA-KAKULA 2008 Cu, Co, Congo Feasibility Open Pit (4) 1.3Bt
Zn (DRC) - New Project & Underground @ 2.72% Cu;
36.5 Mt Cu
============= =========== ============ ========================= =============== ===============
GOLPU 2009 Cu, Au PNG Feasibility Underground (5) 820Mt
- New Project @ 1.0% Cu,
0.70g/t Au;
8.2Mt Cu,
18.5Moz Au
============= =========== ============ ========================= =============== ===============
COTE 2010 Au, Cu Canada Feasibility Open Pit (6) 289Mt
Study @ 0.90 g/t
Au; 8.4Moz
Au
============= =========== ============ ========================= =============== ===============
HAIYU 2011 Au China Development/Construction Underground (7) 15Moz
Au
============= =========== ============ ========================= =============== ===============
RED HILL-GOLD 2011 Au United Feasibility Open Pit (8) 47.6Mt
RUSH States Study & Underground @ 4.56 g/t
Au; 7.0Moz
Au
============= =========== ============ ========================= =============== ===============
XILING 2016 Au China Advanced Exploration Underground (9) 383Mt
@ 4.52g/t
Au; 55.7Moz
Au
============= =========== ============ ========================= =============== ===============
Source: after MinEx Consulting, May 2017
(1) Source: http://www.mining--technology.com/projects/la--colosa
(2) Source: http://www.angloamerican.com/media/press--releases/2009
(3) Source: http://www.pretivm.com/projects/brucejack/overview/
(4) Source: https://www.ivanhoemines.com/projects/kamoa--kakula--project/
(5) Source:
http://www.newcrest.com.au/media/resource_reserves/2016/December_2016_Resources_and_Reserves_Statement.pdf
(6) Source: http://www.canadianminingjournal.com/news/gold--iamgold--files--cote--project--pea/
(7) Source: http://www.zhaojin.com.cn/upload/2015--05--31/580601981.pdf
(8) Source: https://mrdata.usgs.gov/sedau/show--sedau.php?rec_id=103
(9) Source: http://www.chinadaily.com.cn/business/2017--03/29/content_28719822.htm
Table A: Tier 1 global copper and gold discoveries since 2006.
This table does not purport to be exhaustive exclusive or
definitive.
Grade Resource Tonnage Grade Contained Metal
Category Category (Mt)
======================
Cu (%) Au (g/t) CuEq Cu (Mt) Au (Moz) CuEq
(%) (Mt)
====== ======== ==== ======= ======== =====
Total >0.2%
CuEq Indicated 2,050 0.41 0.29 0.60 8.4 19.4 12.2
============ ========== ======= ====== ======== ==== ======= ======== =====
Inferred 900 0.27 0.13 0.35 2.5 3.8 3.2
======================= ======= ====== ======== ==== ======= ======== =====
Table B: Alpala Mineral Resource Estimate updated effective 16
November 2018.
Notes:
-- Mr. Martin Pittuck, MSc, CEng, MIMMM, is responsible for
this Mineral Resource estimate and is an "independent qualified
person" as such term is defined in NI 43-101.
-- The Mineral Resource is reported using a cut-off grade
of 0.3% copper equivalent calculated using [copper grade
(%)] + [gold grade (g/t) x 0.6] based on a copper price
of US$2.8/lb and gold price of US$1,160/oz.
-- The Mineral Resource is considered to have reasonable potential
for eventual economic extraction by underground mass mining
such as block caving.
-- Mineral Resources are not Mineral Reserves and do not have
demonstrated economic viability.
-- The statement uses the terminology, definitions and guidelines
given in the CIM Standards on Mineral Resources and Mineral
Reserves (May 2014).
-- The MRE is reported on 100 percent basis.
-- Values given in the table have been rounded, apparent calculation
errors resulting from this are not considered to be material.
-- The effective date for the Mineral Resource statement is
16 November 2018.
This information is provided by RNS, the news service of the
London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United
Kingdom. Terms and conditions relating to the use and distribution
of this information may apply. For further information, please
contact rns@lseg.com or visit www.rns.com.
END
MSCGGGGCGUPBUQA
(END) Dow Jones Newswires
November 15, 2019 02:00 ET (07:00 GMT)
Grafico Azioni Solgold (LSE:SOLG)
Storico
Da Mar 2024 a Apr 2024
Grafico Azioni Solgold (LSE:SOLG)
Storico
Da Apr 2023 a Apr 2024